Replacing charcoal in canister
Replacing charcoal in canister
Found this on another website and thought I'd share it with TGO:
http://www.explorerforum.com/forums/...d.php?t=390605
Should be able to do this on thirdgens. I did this to my Ford but plan on doing this to my other 3 Pontiacs. The charcoal ran about $15 for the 45oz size at Petco and it used about half that. 5 min epoxy at walmart runs about $5.
http://www.explorerforum.com/forums/...d.php?t=390605
Should be able to do this on thirdgens. I did this to my Ford but plan on doing this to my other 3 Pontiacs. The charcoal ran about $15 for the 45oz size at Petco and it used about half that. 5 min epoxy at walmart runs about $5.
Member
Joined: Dec 2013
Posts: 175
Likes: 1
From: Scottsdale, AZ
Engine: 350-TPI
Transmission: 700-R4
Axle/Gears: 3.27 Posi
Member
Joined: Dec 2013
Posts: 175
Likes: 1
From: Scottsdale, AZ
Engine: 350-TPI
Transmission: 700-R4
Axle/Gears: 3.27 Posi
Re: Replacing charcoal in canister
Found this on another website and thought I'd share it with TGO:
http://www.explorerforum.com/forums/...d.php?t=390605
Should be able to do this on thirdgens. I did this to my Ford but plan on doing this to my other 3 Pontiacs. The charcoal ran about $15 for the 45oz size at Petco and it used about half that. 5 min epoxy at walmart runs about $5.
http://www.explorerforum.com/forums/...d.php?t=390605
Should be able to do this on thirdgens. I did this to my Ford but plan on doing this to my other 3 Pontiacs. The charcoal ran about $15 for the 45oz size at Petco and it used about half that. 5 min epoxy at walmart runs about $5.
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM
Mister_Johnny99
Interior Parts Wanted
0
Aug 14, 2015 12:59 PM