Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Car stayed running with key out of ignition

Thread Tools
 
Search this Thread
 
Old Jul 19, 2014 | 11:26 AM
  #1  
TylerSteez's Avatar
Thread Starter
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: May 2013
Posts: 1,494
Likes: 99
From: CT
Car: 86 Trans Am WS6
Engine: 383 stroker
Transmission: 700r4
Axle/Gears: 9 Bolt Torsen 3.70
Car stayed running with key out of ignition

Hey guys, so today I took my car on a 50 minute drive which is the longest I've ever driven it. I noticed my car was getting hot and the temp gauge was reading around 235-240 but wasn't getting any hotter, once I got home and took the key out the car was still running completely fine with its normal idle, I had to turn it off by pulling the fuel pump fuse, I'm guessing it has something to do with the key cylinder but I have a feeling the high temp has something to do with it. That was the longest drive I've ever taken it on, I wasn't getting on it at all either. I turned it off and started it up ten minutes later and everything was fine again. Can anyone think of any other possible causes to consider?
Reply
Old Jul 19, 2014 | 11:26 AM
  #2  
TylerSteez's Avatar
Thread Starter
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: May 2013
Posts: 1,494
Likes: 99
From: CT
Car: 86 Trans Am WS6
Engine: 383 stroker
Transmission: 700r4
Axle/Gears: 9 Bolt Torsen 3.70
Re: Car stayed running with key out of ignition

Also the key is brand new
Reply
Old Jul 19, 2014 | 06:01 PM
  #3  
Vader's Avatar
Moderator
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 19,675
Likes: 314
Re: Car stayed running with key out of ignition

The lock cylinder turns a gear which engages a rack. The rack actuates a linkage rod which is connected to the ignition switch at the base of the steering column, on top of the outer jacket. If the linkage rod is not properly connected, what you described might happen.
Reply
Old Jul 19, 2014 | 08:56 PM
  #4  
TylerSteez's Avatar
Thread Starter
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: May 2013
Posts: 1,494
Likes: 99
From: CT
Car: 86 Trans Am WS6
Engine: 383 stroker
Transmission: 700r4
Axle/Gears: 9 Bolt Torsen 3.70
Re: Car stayed running with key out of ignition

Originally Posted by Vader
The lock cylinder turns a gear which engages a rack. The rack actuates a linkage rod which is connected to the ignition switch at the base of the steering column, on top of the outer jacket. If the linkage rod is not properly connected, what you described might happen.
That's what I've been reading but I have a big feeling it has something to do with the car getting hot
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM
midge54
LTX and LSX
21
Dec 27, 2019 04:14 PM
9192camaro
Engine/Drivetrain/Suspension Parts for Sale
16
Feb 3, 2019 12:21 AM
Kaweh
TBI
3
Aug 9, 2015 02:54 PM
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 8, 2015 08:16 PM




All times are GMT -5. The time now is 01:03 AM.