Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Intermittent code 54.. some symptoms

Thread Tools
 
Search this Thread
 
Old 01-07-2015, 01:12 PM
  #1  
Junior Member
Thread Starter
 
Lck119's Avatar
 
Join Date: Oct 2011
Location: Vancouver, BC
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 RS
Engine: 2.8 V6
Transmission: T5
Intermittent code 54.. some symptoms

1989 2.8, T5.

Car will run great when warmed up. Its about 50/50 sometimes a code 54 will show up and sometimes not. Car doesn't seem to run differently if its there or not.

First symptom is that I don't hear the fuel pump priming when I turn the key. Second symptom, the car takes a long time to start for the first time each day. 6-10 seconds of cranking. And sometimes the car will jerk or stumble in second and third gear. Once its warm though everything runs great. I've replaced the fuel filter and the fuel pump relay. Oh also sometimes I will hear the pump priming when I shut they car off! But never when I first turn the car on.

Thank you!
Old 01-07-2015, 10:06 PM
  #2  
Supreme Member

iTrader: (5)
 
mantaguy's Avatar
 
Join Date: Nov 2010
Location: Mantua NJ
Posts: 5,826
Received 64 Likes on 57 Posts
Car: 1 Owner 1986 TA with a WS6 package
Engine: 5.0 EFI
Transmission: THM700R4
Axle/Gears: 277 Posi Speedo
Re: Intermittent code 54.. some symptoms

Code 54 will show if your fuel pump has low voltage and
Code 54 will also show if your voltage is high on your M/C (mixture control) Solenoid, they both apply for your 2.8.
Old 01-07-2015, 10:25 PM
  #3  
Junior Member
Thread Starter
 
Lck119's Avatar
 
Join Date: Oct 2011
Location: Vancouver, BC
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 RS
Engine: 2.8 V6
Transmission: T5
Re: Intermittent code 54.. some symptoms

Originally Posted by mantaguy
Code 54 will show if your fuel pump has low voltage and
Code 54 will also show if your voltage is high on your M/C (mixture control) Solenoid, they both apply for your 2.8.
Awesome thank you! I'm not 100% sure as to how I would go about checking the two of those things?
Old 01-07-2015, 10:30 PM
  #4  
Junior Member
Thread Starter
 
Lck119's Avatar
 
Join Date: Oct 2011
Location: Vancouver, BC
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 RS
Engine: 2.8 V6
Transmission: T5
Re: Intermittent code 54.. some symptoms

Originally Posted by mantaguy
Code 54 will show if your fuel pump has low voltage and
Code 54 will also show if your voltage is high on your M/C (mixture control) Solenoid, they both apply for your 2.8.
I just did some researching. Is tHe MC solenoid only on carb vehicles? Mine is the MPFI v6.

Sorry I probably should have mentioned that!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
89-IROCZ-5.0TPI
TPI
10
02-22-2022 09:26 PM
Falcon50
DFI and ECM
81
08-22-2020 03:26 PM
Reid Fleming
TPI
2
10-10-2015 09:56 PM
racereese
Tech / General Engine
14
10-03-2015 03:46 PM
Luigytico09
TPI
0
10-01-2015 08:46 AM



Quick Reply: Intermittent code 54.. some symptoms



All times are GMT -5. The time now is 07:06 PM.