Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Engine Dies after running for an hour? Very weird.

Thread Tools
 
Search this Thread
 
Old 04-05-2016, 07:17 AM
  #1  
Member

Thread Starter
 
propaintball96's Avatar
 
Join Date: Jan 2010
Posts: 216
Likes: 0
Received 3 Likes on 3 Posts
Engine Dies after running for an hour? Very weird.

Hey guys,


I am having a very weird engine issue. Car fires up beautifully, runs strong as hell for about 45 minutes to an hour and then when idling, the engine just starts to bog down until it just dies. (Unless I keep it running with the gas pedal)


I go to fire it back up and it wont start unless I keep the carb half way open and then it misfires like crazy.


It almost seems like it has no gas (vacuum issue in the tank?) I tried taking off the gas cap to solve this theory and it seems to be a little better but it definitely still happens... I checked the carb and it definitely has tons of gas shooting in when I open the accelerator pumps.


Engine-


350 Chevy
Edelbrock Dual Plane Intake
AFR Heads
750 Holley Double Pumper
Edelbrock Mechanical Fuel Pump
Dougs Long Tube Headers


ANY IDEAS?!
Old 04-05-2016, 10:32 AM
  #2  
Member
 
bop11's Avatar
 
Join Date: Apr 2014
Location: Eastern PA
Posts: 100
Likes: 0
Received 1 Like on 1 Post
Car: 1988 GTA
Engine: VIN F 305 TPI
Transmission: AUto
Re: Engine Dies after running for an hour? Very weird.

Seems more like the distributor or probably the coil is on the way out. Heat will do this to a coil.
Old 04-06-2016, 02:50 PM
  #3  
Member
 
stephenscamaro's Avatar
 
Join Date: Jan 2016
Location: Hermiston, Oregon
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Camaro
Engine: 2.8 to 383
Transmission: 700r4
Axle/Gears: 3.42
Re: Engine Dies after running for an hour? Very weird.

Vapor lock?
Old 04-06-2016, 02:57 PM
  #4  
Senior Member

 
tealman92's Avatar
 
Join Date: Mar 2002
Location: Ontario, California
Posts: 998
Received 19 Likes on 16 Posts
Car: 1992 Z28
Engine: 383
Transmission: 700R4
Re: Engine Dies after running for an hour? Very weird.

Spark control module in distributor is going out
Old 04-06-2016, 03:10 PM
  #5  
Member
 
stephenscamaro's Avatar
 
Join Date: Jan 2016
Location: Hermiston, Oregon
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Camaro
Engine: 2.8 to 383
Transmission: 700r4
Axle/Gears: 3.42
Re: Engine Dies after running for an hour? Very weird.

Originally Posted by tealman92
Spark control module in distributor is going out
Do HEI distributors have these? Since it is carbed, i didn't think he had one.

Just looked it up~ They do. My bad.

Last edited by stephenscamaro; 04-06-2016 at 03:13 PM. Reason: You were right.
Old 04-06-2016, 07:18 PM
  #6  
Member

Thread Starter
 
propaintball96's Avatar
 
Join Date: Jan 2010
Posts: 216
Likes: 0
Received 3 Likes on 3 Posts
Re: Engine Dies after running for an hour? Very weird.

Originally Posted by tealman92
Spark control module in distributor is going out
Very weird because it's a brand new MSD HEI billet distributor...anyway I could test it without getting a brand new one?
Old 04-12-2016, 01:30 PM
  #7  
Supreme Member
 
rusty vango's Avatar
 
Join Date: Jun 2011
Location: knoxville tn
Posts: 2,036
Likes: 0
Received 5 Likes on 5 Posts
Car: 86 IROC
Engine: 5.0 TPI
Transmission: 700-R-4
Axle/Gears: 2.73 open
Re: Engine Dies after running for an hour? Very weird.

if you bought one of their MSD "street fire " distributors , it was made in china , i have seen a lot of these not be worth the box they came in




All times are GMT -5. The time now is 01:22 AM.