Vortec accessories and a/c compressor fab
Thread Starter
Junior Member
Joined: May 2012
Posts: 86
Likes: 10
From: North Florida
Car: 86 Berlinetta
Transmission: 700r4
Vortec accessories and a/c compressor fab
Hey all,
I'm looking at trying to use vortec brackets/compressor and accessories on my 86 Berlinetta. I'm already running a modified 5.7 vortec, but I'd like to use the brackets from a 97 blazer. The only issue I have encountered is getting the AC to work. Anyone know if the drier from a blazer will work with our heater box? The ac lines and drier are a different part number than ours, but I like the idea of using a more modern compressor.
I'm looking at trying to use vortec brackets/compressor and accessories on my 86 Berlinetta. I'm already running a modified 5.7 vortec, but I'd like to use the brackets from a 97 blazer. The only issue I have encountered is getting the AC to work. Anyone know if the drier from a blazer will work with our heater box? The ac lines and drier are a different part number than ours, but I like the idea of using a more modern compressor.
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Re: Vortec accessories and a/c compressor fab
Perhaps the easiest way would be to use a 3rd gen drier and have an AC shop fabricate a line to the compressor.