Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Crank and stumbling but no start

Thread Tools
 
Search this Thread
 
Old Jan 10, 2020 | 08:01 PM
  #1  
IrocChuck's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2017
Posts: 8
Likes: 0
From: Illinois
Car: 1989 Camaro IROC-Z
Engine: 383 TPI
Transmission: 4 Speed Automatic 700-R4
Axle/Gears: 3.45
Crank and stumbling but no start

89 Iroc with a 350. Car would fire up in the summer and run with no issues. Put it away for a few weeks and now just cranks and sometimes stumble. Unplugged all 8 injectors and fired up first crank and eventually died due to no more fuel in cylinders. This would lead me to an air delivery issue? Not sure what I am overlooking here.

Things I have checked:
Timing is at 6 BTDC which is were it was while running previously
Have spark
Fuel pressure reaches and maintains 43 PSI
Ohm'd out each injector (about 16 ohms)
Noid light each connector (all flashing)
No codes (Other then code 12)
Have RPM when cranking
TPS reads 0.58V at closed throttle
Coolant temp and ambient air temp are < 5 degrees apart

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nick rayer
TPI
28
May 31, 2014 09:09 PM
Chevy86 IROC-Z
Tech / General Engine
56
Oct 7, 2011 06:49 PM
SheldonZ28
LTX and LSX
8
May 27, 2009 02:46 PM
slowTA
DIY PROM
4
Aug 15, 2002 08:57 PM
CHVYPWR
V6
7
Jun 19, 2002 03:58 PM




All times are GMT -5. The time now is 11:22 AM.