will it go
#1
Member
Thread Starter
will it go
car has ZERO emmisions,,1 3/4 full length headers,, TH350 2800Stall
Full sphone torque bar setup,,
eaton trutrac 3.44;1 and 255 x 60 x 15 M/T street slicks ..
my new engine data..
Car was running a 408 with vortecs and ran 13.0 at 107MPH on 1/4
Now new 383 with AFR,s
i think i should run 12.5,s ,, "we may pull the cam and :run a solid flat tappet cam and victor junior to get it up the 480,500hp.
steve in Australia
Full sphone torque bar setup,,
eaton trutrac 3.44;1 and 255 x 60 x 15 M/T street slicks ..
my new engine data..
Car was running a 408 with vortecs and ran 13.0 at 107MPH on 1/4
Now new 383 with AFR,s
i think i should run 12.5,s ,, "we may pull the cam and :run a solid flat tappet cam and victor junior to get it up the 480,500hp.
steve in Australia
Thread
Thread Starter
Forum
Replies
Last Post
camarosobbing
Organized Drag Racing and Autocross
75
05-13-2012 04:12 PM