Theoretical and Street Racing Use this board to ask questions about street racing, discuss your street races, and "who would win?" questions. Keep it safe.

why was my post locked

Thread Tools
 
Search this Thread
 
Old Sep 2, 2002 | 11:20 PM
  #1  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
why was my post locked

I have posted stuff like this before and it was never locked

why was this one locked


it had racing content in there

it had thirden content in there
there was no flame war?
Old Sep 2, 2002 | 11:34 PM
  #2  
Camaro_1986_19's Avatar
Member
 
Joined: May 2002
Posts: 457
Likes: 0
From: Lehighton, PA
Here's why it was locked: Cuz you were dreaming when you wrote this. The dude in the Camaro wasn't trying, I'd bet my 400 dollar paycheck on it. You would be killed and by the way, I beat a Neon R/T with 150 hp and a DOHC so how can a stock Neon with auto beat a 6 cylinder?
Old Sep 2, 2002 | 11:49 PM
  #3  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
2.8 camaro stock around mid 17 seconds

my car low 16's

if I can get my mods back low 15's to high 14's

when I had my turbo 12.5


I don't think the camaro would have stood a chance against me at any point

I have races a 3.1 before and if anyone wants to verify the story you can ask camarocrazy92rs@aol.com or pm greenmachine92rs

we raced a few times and everytime I take off unless we are in high temps


the camaro was trying

if he wasn't he wouldn't have made that remakr

just b/c I drive an import doesn't mean that I am slow.
Old Sep 2, 2002 | 11:50 PM
  #4  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
Originally posted by Camaro_1986_19
The dude in the Camaro wasn't trying, I'd bet my 400 dollar paycheck on it.
so can I colllect my 400 now?

You would be killed and by the way, I beat a Neon R/T with 150 hp and a DOHC so how can a stock Neon with auto beat a 6 cylinder?
and who said I was driving a stock neon with an auto?
Old Sep 2, 2002 | 11:52 PM
  #5  
Camaro_1986_19's Avatar
Member
 
Joined: May 2002
Posts: 457
Likes: 0
From: Lehighton, PA
You didn't say that, That's what the one assclown in the other post said. People always put down 6 cyl Camaro's, I am running mid 15's actually a 15.55 to be exact.
Old Sep 2, 2002 | 11:59 PM
  #6  
V6canvas's Avatar
Senior Member
20 Year Member
Liked
Loved
iTrader: (1)
 
Joined: Jan 2002
Posts: 757
Likes: 10
From: Middle of MI
Car: 1989 Trans Am GTA
Engine: Stock LS1
Transmission: T56
Axle/Gears: 3.70 9 bolt
He was replying to me, i said that I beat a v6 3rd gen in your locked post.

I know he was trying 'cause he was trying to get over and thought that a neon would be easy to get around. We were even for the width of the intersection (until the rpms started to build) then I started to get ahead of him. once ahead, I heard him get off it and he then moved over a couple lanes and got of the road. I don't take any satisfation in that win because
a) anything a stock A/T neon can beat is pathetic.
b) This was in Flint, where at least 75% of all cars there should be either scrapped or in need of major work.

I was only using this as an example that the RX7 could easily win
Old Sep 3, 2002 | 12:00 AM
  #7  
Crazy Firebird Kid's Avatar
Member
 
Joined: Nov 2001
Posts: 356
Likes: 0
From: Colorado Springs, CO
Car: 84 Trans Am
Engine: 350
Transmission: 700R4
Axle/Gears: 3.73
Originally posted by Camaro_1986_19
You didn't say that, That's what the one assclown in the other post said. People always put down 6 cyl Camaro's, I am running mid 15's actually a 15.55 to be exact.
Then post your slip from when you ran that 15.55

:lala: :lala:
Old Sep 3, 2002 | 12:01 AM
  #8  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
Originally posted by Camaro_1986_19
You didn't say that, That's what the one assclown in the other post said. People always put down 6 cyl Camaro's, I am running mid 15's actually a 15.55 to be exact.
cehck out my name

rx7

stats stock

146hp at 6500rpms
138lbs/ft at 3800rpms
2625lbs
0-60 7.7
1/4 about 16.4

that is stock

granted mine doesn't have much for mods anymore but pistonless wonder does better with mods then a piston car
Old Sep 3, 2002 | 12:03 AM
  #9  
Camaro_1986_19's Avatar
Member
 
Joined: May 2002
Posts: 457
Likes: 0
From: Lehighton, PA
My Shadow would beat your car, My Shadow's rated at 174 hp stock
Old Sep 3, 2002 | 12:06 AM
  #10  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
more hp doesn't mean a car would be faster then one with less


what does your car run

and those are stock numbers

my car isn't stock
and now that I have a little more income comming in I should be a lot faster

as far as your 15.55 run where is the timeslip as well as the mods ou have put on your car?
Old Sep 3, 2002 | 12:10 AM
  #11  
Camaro_1986_19's Avatar
Member
 
Joined: May 2002
Posts: 457
Likes: 0
From: Lehighton, PA
My Shadow is stock and the guy that I bought it off of ran a 15.79 at the track, I believe him because I seen the time slip and I am friends with him.
Mods on my Camaro are: Hypertech Powerchip, Dynomax catback exhuast, Hooker 60 Headers, Crane Competition Racing Cam. Performance Valves, Lifters. And performance pistions
Old Sep 3, 2002 | 12:10 AM
  #12  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
Originally posted by Camaro_1986_19
My Shadow would beat your car, My Shadow's rated at 174 hp stock
just found your post as far as times
also your car running a 15.75 stock with 174hp

vs my car running 146hp at 16.04 with a crappy launch
I'm sure I could do better
Old Sep 3, 2002 | 12:12 AM
  #13  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
Originally posted by Camaro_1986_19
My Shadow is stock and the guy that I bought it off of ran a 15.79 at the track, I believe him because I seen the time slip and I am friends with him.
Mods on my Camaro are: Hypertech Powerchip, Dynomax catback exhuast, Hooker 60 Headers, Crane Competition Racing Cam. Performance Valves, Lifters. And performance pistions
what brand pistons, what would it raise your compression to?

what valves, honestly I bet that just by replacing he valves you are not going to make much

who makes the lifters and what ratio are they

what are the specs on the cam
Old Sep 3, 2002 | 12:14 AM
  #14  
Camaro_1986_19's Avatar
Member
 
Joined: May 2002
Posts: 457
Likes: 0
From: Lehighton, PA
Ask the dude that rebuilt my engine. He said he put all performance stuff in, I paid 1800.00 for it and it goes HELLA lot faster
Old Sep 3, 2002 | 12:18 AM
  #15  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
I don't know the guy

and being he built the motor for you didn't you get a bill that had exactly what you bought

if it was me I would have asked for that this way I would know what parts I have

actually if it was me I would have asked for specific parts myself rather then let him pick

also what mph did you run the 15.55 at as well as the 15.79?
Old Sep 3, 2002 | 12:21 AM
  #16  
Camaro_1986_19's Avatar
Member
 
Joined: May 2002
Posts: 457
Likes: 0
From: Lehighton, PA
15.55 I ran 92 mph and the 15.79 I believe the slip said 88 mph
Old Sep 3, 2002 | 12:27 AM
  #17  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
well I would kindly ask of you to get the build sheet or the name and phone number of the guy who built your motor

I am willing to call him up myself
Old Sep 3, 2002 | 12:34 AM
  #18  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
have you also ever taken the shadow to the track yourself?
Old Sep 3, 2002 | 12:36 AM
  #19  
Camaro_1986_19's Avatar
Member
 
Joined: May 2002
Posts: 457
Likes: 0
From: Lehighton, PA
I only did once and got a 15.62 but I think something was wacky that day
Old Sep 3, 2002 | 12:39 AM
  #20  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
thank you

now I will bring up the past and point out the BS for everyone to see


Originally posted by Camaro_1986_19
You didn't say that, That's what the one assclown in the other post said. People always put down 6 cyl Camaro's, I am running mid 15's actually a 15.55 to be exact.
https://www.thirdgen.org/techbb2/sho...highlight=mods

you claim a 15.1 there for your camaro
but here you claim a slower speed of 15.55 for your time

also as far as mods you didn't claim the lifters in there but you do here. you didn't claim the performance pullies on this post.. now granted it might have slipped but still you shouldn't forgot something simple like that

you also claim that your time of 15.79 was ran by the prev owner

yet you have run a 15.9 in your shadow according to the post I brought up above

but here you claim to have run a 15.62

what gives
Old Sep 3, 2002 | 12:40 AM
  #21  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
oh and I am still waiting for the guys name and number since you want me to ask him this way I can get your build sheet info
Old Sep 3, 2002 | 01:04 AM
  #22  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
sorry to turn this thread that started out into curiousity as to why a post of mine was locked when it fit the req of posting here.

instead it turned into a little bit of a flame war and that wasn't what I tried to do. but having camaro_1986_19 come off saying right off the bat that I was dreaming wasn't a kind start on his end

in the long run though between this post and his other post being put together all of you can see the B.S. as you can tell by the times he was staying on this post. then with my last comment about how things didn't add up he stuck around for about another 20 min or so then just left without giving a reply

I even offered to call the person who built his motor to get what was put in there... he flat out ignored the question.

his times do not add up and yet he has nothing to say at this point.

I feel sorry for those around him with his tall tales and his verbal attacks he likes to give without having any facts to base his arguement on. and I feel sorry to the f-body and domestic world for him b/c it is ppl like him who give you guys a bad name.


but anyway back to my orig point on this post

still curious as to why my thread on racing a camaro was locked....


thanx

rx7speed/james
Old Sep 3, 2002 | 01:56 AM
  #23  
Crazy Firebird Kid's Avatar
Member
 
Joined: Nov 2001
Posts: 356
Likes: 0
From: Colorado Springs, CO
Car: 84 Trans Am
Engine: 350
Transmission: 700R4
Axle/Gears: 3.73
whats up with the new name btw?
Old Sep 3, 2002 | 02:06 AM
  #24  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
for some reason my rx7speed name wasn't letting me make start a reply to a post out of nowhere

I made a post 1 min then the next i can't so I made this name

till my rx7speed name works right


rx7whoreboy is b/c I'm the best post ***** around

already up to 27 post a day
Old Sep 3, 2002 | 02:28 AM
  #25  
Ragnarok_Tyr's Avatar
Member
 
Joined: Mar 2002
Posts: 261
Likes: 0
From: the driver's seat.
Check the 'Neon Viper Edition' thread on this board to get the REAL skinny on this guy's Shadow......the post is way down there, but worth it.
Old Sep 3, 2002 | 07:48 AM
  #26  
Mark A Shields's Avatar
Supreme Member
20 Year Member
 
Joined: Jan 2001
Posts: 7,164
Likes: 1
From: Someone owes me 10,000 posts
Car: 99 Formula
Engine: LS1
Transmission: T56
Axle/Gears: 342
Originally posted by Camaro_1986_19
15.55 I ran 92 mph and the 15.79 I believe the slip said 88 mph
If those are track times, then a 92mph run should be faster than 15.55.
Old Sep 3, 2002 | 08:37 AM
  #27  
Nic's Avatar
Nic
Supreme Member
 
Joined: Sep 2001
Posts: 2,099
Likes: 0
From: Richmond, VA
Car: 1993 Ford Mustang
Engine: 5.0L
Transmission: T5
Originally posted by Camaro_1986_19
Ask the dude that rebuilt my engine. He said he put all performance stuff in, I paid 1800.00 for it and it goes HELLA lot faster
If I payed $1800 and only ran 15's I'd push my car off a cliff.
Old Sep 3, 2002 | 08:39 AM
  #28  
Nic's Avatar
Nic
Supreme Member
 
Joined: Sep 2001
Posts: 2,099
Likes: 0
From: Richmond, VA
Car: 1993 Ford Mustang
Engine: 5.0L
Transmission: T5
for some reason my rx7speed name wasn't letting me make start a reply to a post out of nowhere
Oops...didn't realize that was you. I thought you were just some newbie coming to the board to post a camaro-kill. My apologies about the other thread.
Old Sep 3, 2002 | 11:23 AM
  #29  
fly89gta's Avatar
Supreme Member
iTrader: (1)
 
Joined: Dec 1999
Posts: 4,335
Likes: 4
From: Mays Landing NJ
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
i'm still waiting for a timeslip on his 15.5 run, and yeah...a 92MPH trap speed should be a lot faster than 15.5. What was your 60' times?
Old Sep 3, 2002 | 02:47 PM
  #30  
unknown_host's Avatar
Supreme Member
iTrader: (1)
 
Joined: Mar 2001
Posts: 3,245
Likes: 1
From: Medford, Oregon
Car: 1989 Iroc Z L98
Originally posted by rx7whoreboy
who makes the lifters and what ratio are they

hehe anybody else see this?
Old Sep 3, 2002 | 04:49 PM
  #31  
Polecat's Avatar
Senior Member
 
Joined: Feb 2000
Posts: 769
Likes: 0
From: Stillwater, OK
Originally posted by unknown_host
hehe anybody else see this?
I did...LOL...what ratio, hmmmmmm.
"I've got the new Comp 1.57279'er ratio lifters.....added 21.7 HP and 13.2 ft.lbs. of torque..."
Old Sep 3, 2002 | 04:59 PM
  #32  
Mark A Shields's Avatar
Supreme Member
20 Year Member
 
Joined: Jan 2001
Posts: 7,164
Likes: 1
From: Someone owes me 10,000 posts
Car: 99 Formula
Engine: LS1
Transmission: T56
Axle/Gears: 342
Originally posted by Camaro_1986_19
My Shadow is stock and the guy that I bought it off of ran a 15.79 at the track, I believe him because I seen the time slip and I am friends with him.
Mods on my Camaro are: Hypertech Powerchip, Dynomax catback exhuast, Hooker 60 Headers, Crane Competition Racing Cam. Performance Valves, Lifters. And performance pistions
A racing cam> in a V6 3rd Gen motor, now that's funny.
Old Sep 3, 2002 | 05:43 PM
  #33  
rezinn's Avatar
Supreme Member
 
Joined: Dec 2000
Posts: 3,813
Likes: 2
From: California
Performance lifters? rofl. You can stop some time, you don't have to keep lying to us. Do you also have a performance seat cushion?
Old Sep 3, 2002 | 05:51 PM
  #34  
fly89gta's Avatar
Supreme Member
iTrader: (1)
 
Joined: Dec 1999
Posts: 4,335
Likes: 4
From: Mays Landing NJ
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
i still wanna see his turbo 2.8 he had/has in his thirdgen, he was talking about that a while back..i'd give anything to see the pic
Old Sep 3, 2002 | 07:13 PM
  #35  
5.0mustang's Avatar
Supreme Member
 
Joined: Dec 2001
Posts: 1,530
Likes: 0
From: Kensington, CT
I remember when he was leaving here, I guess he thinks we are to easy to trick. And 15.55 at 92, HAHA, what are the specs on all the parts???
Old Sep 3, 2002 | 07:37 PM
  #36  
iroc22's Avatar
Supreme Member
 
Joined: Jan 2001
Posts: 4,415
Likes: 2
From: Surrey, BC
Interesting.







P.S. I didn't lock the thread.
Old Sep 3, 2002 | 07:50 PM
  #37  
fly89gta's Avatar
Supreme Member
iTrader: (1)
 
Joined: Dec 1999
Posts: 4,335
Likes: 4
From: Mays Landing NJ
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
Originally posted by iroc22
Interesting.







P.S. I didn't lock the thread.
whoah!! you feelin alright man???
Old Sep 3, 2002 | 08:12 PM
  #38  
unknown_host's Avatar
Supreme Member
iTrader: (1)
 
Joined: Mar 2001
Posts: 3,245
Likes: 1
From: Medford, Oregon
Car: 1989 Iroc Z L98
i think he means that another moderator locked the previous thread.
Old Sep 3, 2002 | 08:16 PM
  #39  
Nic's Avatar
Nic
Supreme Member
 
Joined: Sep 2001
Posts: 2,099
Likes: 0
From: Richmond, VA
Car: 1993 Ford Mustang
Engine: 5.0L
Transmission: T5
IBTL :lala:
Old Sep 3, 2002 | 08:17 PM
  #40  
Nic's Avatar
Nic
Supreme Member
 
Joined: Sep 2001
Posts: 2,099
Likes: 0
From: Richmond, VA
Car: 1993 Ford Mustang
Engine: 5.0L
Transmission: T5
This is my 1000th post here!

:lala: :lala: :lala: :lala: :lala: :lala: :lala: :lala: :lala:
Old Sep 3, 2002 | 08:37 PM
  #41  
fly89gta's Avatar
Supreme Member
iTrader: (1)
 
Joined: Dec 1999
Posts: 4,335
Likes: 4
From: Mays Landing NJ
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
Originally posted by unknown_host
i think he means that another moderator locked the previous thread.
yeah i think you're right but he still didn't lock this one :sillylol: :sillylol: :sillylol:
Old Sep 3, 2002 | 08:48 PM
  #42  
Mark A Shields's Avatar
Supreme Member
20 Year Member
 
Joined: Jan 2001
Posts: 7,164
Likes: 1
From: Someone owes me 10,000 posts
Car: 99 Formula
Engine: LS1
Transmission: T56
Axle/Gears: 342
Originally posted by Nic
This is my 1000th post here!

:lala:
Old Sep 3, 2002 | 08:57 PM
  #43  
CrazyHawaiian's Avatar
Supreme Member
 
Joined: Apr 2001
Posts: 5,675
Likes: 3
From: Changing Tires
Car: too many ...
im close to 1000 too!!
Old Sep 3, 2002 | 09:10 PM
  #44  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
Originally posted by Polecat
I did...LOL...what ratio, hmmmmmm.
"I've got the new Comp 1.57279'er ratio lifters.....added 21.7 HP and 13.2 ft.lbs. of torque..."
oops lifters... not rocker arms

my bad
Old Sep 3, 2002 | 09:11 PM
  #45  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
Originally posted by iroc22
Interesting.







P.S. I didn't lock the thread.

hehe

thanx man

by the way do you have any idea why my name still is not letting me post

I am still the post ***** boy
Old Sep 3, 2002 | 09:15 PM
  #46  
rx7whoreboy's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 68
Likes: 0
just also want to add

notice that he still has not come out when I made the mismatched info known to everyone using his own words thta he has yet to reply now to this thread???
Old Sep 3, 2002 | 09:38 PM
  #47  
elevario's Avatar
Supreme Member
 
Joined: Mar 2001
Posts: 1,065
Likes: 0
From: Tucson, Az, USA
Car: 1992 RS
Engine: 3.1L V6
Transmission: T5
Maybe this is his engine! j/k
Attached Thumbnails why was my post locked-twin-turbo-v6-.jpg  
Old Sep 3, 2002 | 09:40 PM
  #48  
Matt86t/a's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 637
Likes: 0
From: Hillsborough, NJ and SJU in Philly
with a trap of 92, you should be running 15.0-14.8. Not 15.55. And don't tell me you spun really bad...

~Matt
Old Sep 4, 2002 | 09:00 AM
  #49  
Polecat's Avatar
Senior Member
 
Joined: Feb 2000
Posts: 769
Likes: 0
From: Stillwater, OK
Originally posted by rx7whoreboy
oops lifters... not rocker arms

my bad
you mean rockers, not lifters.....
Old Sep 4, 2002 | 12:02 PM
  #50  
Mark A Shields's Avatar
Supreme Member
20 Year Member
 
Joined: Jan 2001
Posts: 7,164
Likes: 1
From: Someone owes me 10,000 posts
Car: 99 Formula
Engine: LS1
Transmission: T56
Axle/Gears: 342
Originally posted by Polecat
you mean rockers, not lifters.....
Yeah, ***** boy, just stick to your wankels.



All times are GMT -5. The time now is 01:12 PM.