Theoretical and Street Racing Use this board to ask questions about street racing, discuss your street races, and "who would win?" questions. Keep it safe.

did i race an lt1?

Thread Tools
 
Search this Thread
 
Old Apr 6, 2009 | 07:58 PM
  #1  
xbox07's Avatar
Thread Starter
Member
 
Joined: Aug 2008
Posts: 353
Likes: 0
From: Greenwood SC
Car: 86' Z28
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73 (for now)
did i race an lt1?

Saturday night i was getting some gas and i noticed a 4th gen (92-97 im guess like a 94) at the gas station. I pulled out of the station behind him heading the same way (not on purpose). I pulled out fast because i was messing with my friend in his bmw behind me. When i got close the camaro changed into the left lane in a hurry. I rolled up beside him we were doing bout 45-50 and i could tell he wanted to race so i hung beside him to see if he would honk (cause i don't have a horn). After a few seconds he took off and i followed, he pulled about half a car and it stayed that way till we shut down at 90. I rolled up beside him and asked him what he was running and he said "i'd tell ya but i'd have to kill ya" and thats all i got before he turned. I didn't know if it was a v6 or a v8 because i couldn't hear it over my car and i haven't raced many other cars. So did i hang with an lt1 or get my butt raped by a 3.4l v6?
Reply
Old Apr 6, 2009 | 08:02 PM
  #2  
xbox07's Avatar
Thread Starter
Member
 
Joined: Aug 2008
Posts: 353
Likes: 0
From: Greenwood SC
Car: 86' Z28
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73 (for now)
Re: did i race an lt1?

my cars a 350
edelbrock 600 carb
edelbrock performer intake
a mild cam (don't know the specs)
headers
and i think my car has 2:73 gears (how would i find out?)
Reply
Old Apr 6, 2009 | 10:42 PM
  #3  
HeavyMetal350's Avatar
Member
 
Joined: Apr 2008
Posts: 127
Likes: 0
From: Fayetteville, Pa/Port Orange, Fl
Car: '91 z28
Engine: L98
Transmission: T5
Axle/Gears: 3:73 gears
Re: did i race an lt1?

alright... well first off, 4th gens did not include 92's. they were still 3rd gens. im sure you didnt lose to a 6 cyl. Lt1s have a nice power ban and are decently strong engines. Thats what it most likley was.
Reply
Old Apr 6, 2009 | 11:27 PM
  #4  
xbox07's Avatar
Thread Starter
Member
 
Joined: Aug 2008
Posts: 353
Likes: 0
From: Greenwood SC
Car: 86' Z28
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73 (for now)
Re: did i race an lt1?

Originally Posted by HeavyMetal350
alright... well first off, 4th gens did not include 92's. they were still 3rd gens. im sure you didnt lose to a 6 cyl. Lt1s have a nice power ban and are decently strong engines. Thats what it most likley was.
thanks i meant 93'. Well im surprised i stayed with it so well, i wasn't catching him but he wasn't losing me.
thanks for the reply
Reply
Old Apr 7, 2009 | 06:52 AM
  #5  
25thmustang's Avatar
Supreme Member
 
Joined: May 2003
Posts: 2,839
Likes: 0
From: CT
Car: Mustang
Engine: Bolt Ons
Transmission: Stock
Axle/Gears: 3.73
Re: did i race an lt1?

I want to say a V6 actually. Probably a modded one, but still V6.
Reply
Old Apr 7, 2009 | 03:26 PM
  #6  
HeavyMetal350's Avatar
Member
 
Joined: Apr 2008
Posts: 127
Likes: 0
From: Fayetteville, Pa/Port Orange, Fl
Car: '91 z28
Engine: L98
Transmission: T5
Axle/Gears: 3:73 gears
Re: did i race an lt1?

honestly... those pre-ls1 v6's suck...i mean sure they are better than the 3rd gens v6's but they are not as fast as the later 4th gens 6's.I have a feeling that it was an lt1 ...but who knows
Reply
Old Apr 7, 2009 | 03:45 PM
  #7  
91interceptorZ's Avatar
Supreme Member
iTrader: (3)
 
Joined: May 2008
Posts: 1,116
Likes: 1
From: boise, ID
Car: 91 B4C "police special service"
Engine: L98 494hp
Transmission: tko-600 on order
Axle/Gears: 3.23 true trac
Re: did i race an lt1?

those v6's can run 16's which shoud be close to a stock mid-80's with 2.73 gears...I would say v6.....a Z28 would have badges (usually) and would run a low 14 if not a high 13 and smoke even a good running 350 tuned port.
Reply
Old Apr 7, 2009 | 05:06 PM
  #8  
xbox07's Avatar
Thread Starter
Member
 
Joined: Aug 2008
Posts: 353
Likes: 0
From: Greenwood SC
Car: 86' Z28
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73 (for now)
Re: did i race an lt1?

Originally Posted by 25thmustang
I want to say a V6 actually. Probably a modded one, but still V6.
I hope it was an lt1 or at least a decently modded v6, i did mess around with a (stock i assume) 3.4 camaro once but he did give me much of a problem
Reply
Old Apr 7, 2009 | 05:11 PM
  #9  
xbox07's Avatar
Thread Starter
Member
 
Joined: Aug 2008
Posts: 353
Likes: 0
From: Greenwood SC
Car: 86' Z28
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73 (for now)
Re: did i race an lt1?

Originally Posted by 91interceptorZ
those v6's can run 16's which shoud be close to a stock mid-80's with 2.73 gears...I would say v6.....a Z28 would have badges (usually) and would run a low 14 if not a high 13 and smoke even a good running 350 tuned port.
lol musta missed the carbed not stock part. I know z28's usually have badges but it was about 1:00am and i couldn't get a good look at it.
Reply
Old Apr 18, 2009 | 11:17 PM
  #10  
Firebat's Avatar
Supreme Member
iTrader: (7)
 
Joined: May 2005
Posts: 3,786
Likes: 3
Re: did i race an lt1?

The 96 and/or 97's came with 3.8 v6's, may have been one of those.
Reply
Old Apr 18, 2009 | 11:39 PM
  #11  
xbox07's Avatar
Thread Starter
Member
 
Joined: Aug 2008
Posts: 353
Likes: 0
From: Greenwood SC
Car: 86' Z28
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73 (for now)
Re: did i race an lt1?

I think it was a lt1 cause im pretty sure my car could take a 16 second car (arn't the 3.4's 16 second cars?)
idk bout the 3.8's

Last edited by xbox07; Apr 18, 2009 at 11:43 PM.
Reply
Old Apr 19, 2009 | 11:28 AM
  #12  
novafirebirdguy's Avatar
Senior Member
 
Joined: Mar 2009
Posts: 503
Likes: 1
From: Des Moines, IA
Car: 90 Formula WS6, 86 Sport Coupe
Engine: 305 TBI, 2.8 MPFI
Transmission: 700r4, 700r4w/vette servos
Axle/Gears: 2.73 Open, 3.42 Open
Re: did i race an lt1?

Originally Posted by xbox07
my cars a 350
edelbrock 600 carb
edelbrock performer intake
a mild cam (don't know the specs)
headers
and i think my car has 2:73 gears (how would i find out?)
You're gear ratio is stamped on the ring and pinion inside the diff. Take off the cover (you probably need to change the oil anyway) and it'll be stamped right there.
Reply
Old Apr 19, 2009 | 12:03 PM
  #13  
xbox07's Avatar
Thread Starter
Member
 
Joined: Aug 2008
Posts: 353
Likes: 0
From: Greenwood SC
Car: 86' Z28
Engine: 350
Transmission: 700r4
Axle/Gears: 2.73 (for now)
Re: did i race an lt1?

Originally Posted by novafirebirdguy
You're gear ratio is stamped on the ring and pinion inside the diff. Take off the cover (you probably need to change the oil anyway) and it'll be stamped right there.
Thanks, i just ran the rpo code and sure enough 2:73 but thats fine with me it gives me something to upgrade.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cam-aro
Camaros Wanted
2
Nov 12, 2015 03:35 PM
darwinprice
Organized Drag Racing and Autocross
17
Oct 11, 2015 11:51 PM
gord327
Transmissions and Drivetrain
19
Oct 3, 2015 01:25 PM
meeklay812
Camaros for Sale
1
Oct 1, 2015 03:46 PM
tmork454
Transmissions and Drivetrain
0
Sep 29, 2015 06:33 PM




All times are GMT -5. The time now is 10:07 AM.