Theoretical and Street Racing Use this board to ask questions about street racing, discuss your street races, and "who would win?" questions. Keep it safe.

'97 SS/SLP Z28 LT1 6spd

Thread Tools
 
Search this Thread
 
Old Jul 2, 2009 | 02:38 PM
  #1  
Demon355's Avatar
Thread Starter
Supreme Member
20 Year Member
iTrader: (1)
 
Joined: Aug 2002
Posts: 2,633
Likes: 4
From: Toronto, Ont
'97 SS/SLP Z28 LT1 6spd

How fast are these cars in stock trim? What would it take for them to dip into the 12's without opening up the motor?
Reply
Old Jul 2, 2009 | 03:06 PM
  #2  
Firebat's Avatar
Supreme Member
iTrader: (7)
 
Joined: May 2005
Posts: 3,786
Likes: 3
Re: '97 SS/SLP Z28 LT1 6spd

4.10 gears, drag radials, and longtube headers should definitely put it in the 12s. Some in stock trim can beat some of the slower stock LS1's. Some are factory freaks and some are slugs. Some people know how to drive better than others. I think high 14's for most stock LT1's.
Reply
Old Jul 2, 2009 | 03:13 PM
  #3  
HypnoToad's Avatar
Member
 
Joined: Feb 2008
Posts: 115
Likes: 0
From: Griffin,GA
Car: 1991 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.23
Re: '97 SS/SLP Z28 LT1 6spd

high 14s? are they that slow?.....i cant see a LT1 running around the same as my bolt on L03.

i thought low 14s,or maybe 13s with some nice tires.
Reply
Old Jul 2, 2009 | 04:17 PM
  #4  
vette9190's Avatar
Member
iTrader: (2)
 
Joined: Mar 2002
Posts: 346
Likes: 1
From: Lowell, In
Car: 1991 Chevy Camaro RS
Engine: 350 TPI
Transmission: 700R4,
Axle/Gears: 3.73 w/SLP Zexel Torsen Limited Sli
Re: '97 SS/SLP Z28 LT1 6spd

The lt1's run low to mid 14's stock an ss Camaro or ws6 bird driven right can hit high 13's
I hear that the later lt1 cars may have gotten some lt4 parts kinda like some of the ls1 cars got ls6 blocks toward the end of that production run.
Reply
Old Jul 2, 2009 | 06:21 PM
  #5  
Firebat's Avatar
Supreme Member
iTrader: (7)
 
Joined: May 2005
Posts: 3,786
Likes: 3
Re: '97 SS/SLP Z28 LT1 6spd

my bad, i meant low 14s
Reply
Old Jul 2, 2009 | 07:53 PM
  #6  
igotta355z28's Avatar
Senior Member
iTrader: (1)
 
Joined: Dec 2006
Posts: 998
Likes: 1
From: Bedford Tx
Car: 1991 Z28 1LE
Engine: 370CID GenIII
Transmission: 4l60e
Axle/Gears: 4.33 Moser 9inch
Re: '97 SS/SLP Z28 LT1 6spd

Originally Posted by vette9190
The lt1's run low to mid 14's stock an ss Camaro or ws6 bird driven right can hit high 13's
I hear that the later lt1 cars may have gotten some lt4 parts kinda like some of the ls1 cars got ls6 blocks toward the end of that production run.
only difference between a lt4 and lt1 is heads cam intake and rockers, no LT1 got any LT4 parts stock, there were a few LT4 powered 4thgen cars though, those being the 106 SLP SS 1997 CAMAROS, and 29 SLP 1997 FIREHAWKS. Wich if this 97 that we are talking about really is a 97 SLP SS then its LT4 powered... and side note the "LS6 block" ls1s dont have any performance edge over a normal ls1 engine.
Reply
Old Jul 2, 2009 | 08:15 PM
  #7  
TTA 1387's Avatar
Senior Member
 
Joined: Apr 2001
Posts: 940
Likes: 0
From: Diamondhead, MS
Car: 89 20th Ann. TA
Engine: Turbo 3.8 V6
Transmission: 200 4R
Axle/Gears: 3.27
Re: '97 SS/SLP Z28 LT1 6spd

Mine ran 13.50@103 when it was bone stock back in 96. Then I swapped in 4.10 gears, K&N, 160 t-stat, and a HPP+ and ran a 13.18@104. Still on the stock GSC's. HOT cam, SLP dual cat headers, Borla/SLP cat back, LCA's and panhard rod, and Nitto drag radials got me to 12.4@111.

Most LT1's ran high 13's. There were some that ran in the 14's also.
Reply
Old Jul 3, 2009 | 12:48 PM
  #8  
BigWhiteGTP's Avatar
Supreme Member
20 Year Member
 
Joined: Jan 2003
Posts: 2,043
Likes: 3
From: San Diego
Car: 1994 Trans Am
Engine: LT1
Transmission: Auto
Axle/Gears: 3.23
Re: '97 SS/SLP Z28 LT1 6spd

My stock Auto/3.23 LT1 ran a 14.3 in warmer air. With gutted ram air, LTs, cutout, stall, Madz28 tune it was neck and neck with my bro's same modded LT1 T/A with 3.42s and he ran 13.1s @103. Again, both stalled auto LT1s.
Reply
Old Jul 3, 2009 | 02:59 PM
  #9  
Demon355's Avatar
Thread Starter
Supreme Member
20 Year Member
iTrader: (1)
 
Joined: Aug 2002
Posts: 2,633
Likes: 4
From: Toronto, Ont
Re: '97 SS/SLP Z28 LT1 6spd

I figured it wouldn't be too hard. The details about this car is unknown exactly. It was slightly modded but I wasn't told what parts were used. I was considering this car to buy but the guy wanted too much for what I was offering. Maybe it is a real SLP/SS.
Reply
Old Jul 3, 2009 | 10:40 PM
  #10  
tpivette89's Avatar
Supreme Member
20 Year Member
 
Joined: Dec 2001
Posts: 1,960
Likes: 1
From: Newark, DE
Car: 2006 Corvette
Engine: LS2
Transmission: T56
Axle/Gears: 3.42s
Re: '97 SS/SLP Z28 LT1 6spd

LT1s are underrated and overlooked by most of the automotive world. just a few personal examples:

- my ex GFs 94 auto Formula went 14.0 at 100 absolutely bone stock
- a friends 95' Z28 6speed went 13.5 at 104 with only a catback and a LT4 KM
- my free modded 93' Vette 6speed went 13.3 at 107
- my current LT4 Vette with free mods, hotcam, and a tune went 12.2 at 116mph

LTXs are faster and have more potential than most people think
Reply
Old Jul 3, 2009 | 10:57 PM
  #11  
DIGGLER's Avatar
Supreme Member
iTrader: (1)
 
Joined: Jun 2003
Posts: 3,059
Likes: 75
From: SC
Re: '97 SS/SLP Z28 LT1 6spd

depending on location, i would imagine a set of drag radials could put one into the 12's. if not, a couple of the usual boltons/exhaust/cai in addition to the radials should do it.
Reply
Old Jul 4, 2009 | 10:40 PM
  #12  
LoudmouthSS's Avatar
Senior Member
20 Year Member
iTrader: (7)
 
Joined: May 2005
Posts: 856
Likes: 10
From: West Palm Beach, FL
Car: 1991 Z28
Engine: SBC
Transmission: 700R4
Axle/Gears: 2.73
Re: '97 SS/SLP Z28 LT1 6spd

I had a 1996 z28, 6 speed. I couldn't drive it worth ****..i think with a 2.5 sixty foot i clicked off 14.1 @ 98mph...might have been a 2.3. Car was tough to launch, had alot of chatter (flywheel was messed up). I pegged the rev limiter just before i went through the traps too. Car had intake, slp loudmouth and underdrive pullies.


I loved the damn car...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mdenz3
LSX and LTX Parts
3
Dec 10, 2015 11:18 AM
L0tuS
LTX and LSX
2
Oct 4, 2015 08:07 AM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 28, 2015 12:35 AM
sahlomonic
Electronics
7
Sep 20, 2015 07:15 PM
L0tuS
LTX and LSX
0
Sep 4, 2015 11:16 PM




All times are GMT -5. The time now is 06:18 AM.