Third Gen Fest '15 Discuss plans for the IL gathering set for May 22nd and 23rd in Crete, IL

Third Gen Fest '10'

Thread Tools
 
Search this Thread
 
Old Feb 12, 2010 | 11:54 PM
  #101  
Roc THIS's Avatar
Member
 
Joined: Feb 2009
Posts: 224
Likes: 0
From: Plainfield IL
Car: 87 Yellow Iroc-Z
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: BW 9 bolt
Re: Third Gen Fest '10'

I disagree. Fords must park a mile down and walk to the fest .
Reply
Old Feb 13, 2010 | 01:55 AM
  #102  
racing geek's Avatar
Supreme Member
iTrader: (5)
 
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: Third Gen Fest '10'

Originally Posted by Roc THIS
I disagree. Fords must park a mile down and walk to the fest .
That's still too close because if they run they may be able to get there in ~10 minutes or less.
Reply
Old Feb 13, 2010 | 10:45 AM
  #103  
anthony714's Avatar
Senior Member
iTrader: (5)
 
Joined: Jan 2005
Posts: 883
Likes: 0
Re: Third Gen Fest '10'

fords should rot in hell...........
Reply
Old Feb 20, 2010 | 09:03 PM
  #104  
BlueZee28's Avatar
Supreme Member
15 Year Member
iTrader: (30)
 
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: Third Gen Fest '10'

I wish I could bring my car out to this...unfortunately I won't be able to make it. I will be in Atlanta at G14 with my Z that weekend.
Reply
Old Mar 1, 2010 | 10:22 PM
  #105  
IrocTTZ's Avatar
Junior Member
 
Joined: Jan 2009
Posts: 11
Likes: 0
From: Indianapolis,IN
Car: 92 z-28 clone,85&86 IrocZ ;)
Engine: 350 tpi
Transmission: 700r4,t-5
Axle/Gears: stock disc brake rears
Re: Third Gen Fest '10'

I would like to try and make it this year. I am attending school Out in Pennsylvania but am originally from Indy. Would like to make the trip back because ive been wanting to attend 3rd gen fest for years. just never have my car going around the time of the event. but hopefully this year will be different. would love to see all the cars in one place. i am a addict i have had about 18 of these cars since i was 16 with a 86 berlinetta v6 5-speed being my first and i havent been able to get away from them since hope to see you all there!
Reply
Old Mar 2, 2010 | 12:11 PM
  #106  
lownslow's Avatar
Junior Member
 
Joined: Jul 2008
Posts: 45
Likes: 0
From: Calumet Twnshp, IN
Car: 1986 Sport Coupe Camaro
Engine: 305 TBI
Transmission: 700R4
Re: Third Gen Fest '10'

I definitely will try to make it.

I am curious as to seeing where my Camaro will stand in the "Stock" department since (both fingers crossed) I still have the original tires on her (and plenty more).
Reply
Old Mar 3, 2010 | 01:09 AM
  #107  
therealjcamry's Avatar
Junior Member
 
Joined: Aug 2009
Posts: 33
Likes: 0
Re: Third Gen Fest '10'

I should definitely be going if the engine and suspension are done, I can put the interior/ext on hold till then. If the cars lookin like a rat rod, oh well
Reply
Old Mar 3, 2010 | 08:56 AM
  #108  
Blitzkrieg91's Avatar
Junior Member
 
Joined: Jan 2008
Posts: 69
Likes: 0
From: Bloomington, IL
Car: 89 Iroc
Engine: 350 TPI
Transmission: Auto
Re: Third Gen Fest '10'

i was planning on bringing my Iroc up from Bloomington IL, but i have my graduation that fell on the same day sadly...next year for me sadly
Reply
Old Mar 3, 2010 | 06:26 PM
  #109  
ziggy89's Avatar
Senior Member
15 Year Member
 
Joined: Mar 2007
Posts: 574
Likes: 2
From: Muscatine IA
Car: 91 Firebird Formula
Engine: 383
Transmission: built 700r4
Axle/Gears: 4.11, 9inch
Re: Third Gen Fest '10'

Originally Posted by Blitzkrieg91
i was planning on bringing my Iroc up from Bloomington IL, but i have my graduation that fell on the same day sadly...next year for me sadly

just dont walk lol. you get a diploma either way.
Reply
Old Mar 3, 2010 | 09:24 PM
  #110  
Guest
Guest
 
Posts: n/a
Re: Third Gen Fest '10'

Re: Third Gen Fest '10'
geez just what this show needs ANOTHER trailer queen
_______________
How bout you drive your car from Illinois to California? Putting someone down for bringing a car that far is just ridiculous. How about supporting a fellow third gen and appreciating the fact he is willing to travel cross country and be apart of the event!
Reply
Old Mar 3, 2010 | 10:08 PM
  #111  
Orr89RocZ's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (20)
 
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: Third Gen Fest '10'

Hmm not sure if my car could drive 8 hrs one way.... let me see what i can do here I'd love to attend one of these
Reply
Old Mar 3, 2010 | 10:19 PM
  #112  
xpndbl3's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: Third Gen Fest '10'

Originally Posted by Orr89RocZ
Hmm not sure if my car could drive 8 hrs one way.... let me see what i can do here I'd love to attend one of these
all the cool kids trailer them, even if they're only 45 minutes away.
Reply
Old Mar 4, 2010 | 12:04 AM
  #113  
Thirdgen Ranch's Avatar
Former Sponsor
iTrader: (5)
 
Joined: Apr 2009
Posts: 823
Likes: 1
From: Crete, IL
Car: Too many
Re: Third Gen Fest '10'

Originally Posted by xpndbl3
all the cool kids trailer them, even if they're only 45 minutes away.
No, some of us just push them out of the garage.
Reply
Old Mar 4, 2010 | 08:26 AM
  #114  
Blitzkrieg91's Avatar
Junior Member
 
Joined: Jan 2008
Posts: 69
Likes: 0
From: Bloomington, IL
Car: 89 Iroc
Engine: 350 TPI
Transmission: Auto
Re: Third Gen Fest '10'

Originally Posted by ziggy89
just dont walk lol. you get a diploma either way.
lol its an idea but...my parents would kill me lol. its all good. im going to take it next year and to as many other shows as i can. plan on a Route 66 Road Trip this summer with some graduating friends. hope i can get the car ready for that.
Reply
Old Mar 4, 2010 | 09:07 AM
  #115  
Orr89RocZ's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (20)
 
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: Third Gen Fest '10'

Originally Posted by xpndbl3
all the cool kids trailer them, even if they're only 45 minutes away.
haha awesome, then i wont feel as bad if I haul mine in...atleast til i'm about 30 min away and drive it in. Act like I drove it the whole way...
Reply
Old Mar 4, 2010 | 10:13 AM
  #116  
xpndbl3's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: Third Gen Fest '10'

this is how I usually roll up to thirdgenfest.....with about 10-15 thirdgens behind me everytime.

Name:  DSCN1712-1.jpg
Views: 51
Size:  133.7 KB
Reply
Old Mar 4, 2010 | 12:31 PM
  #117  
ziggy89's Avatar
Senior Member
15 Year Member
 
Joined: Mar 2007
Posts: 574
Likes: 2
From: Muscatine IA
Car: 91 Firebird Formula
Engine: 383
Transmission: built 700r4
Axle/Gears: 4.11, 9inch
Re: Third Gen Fest '10'

Originally Posted by Blitzkrieg91
lol its an idea but...my parents would kill me lol. its all good. im going to take it next year and to as many other shows as i can. plan on a Route 66 Road Trip this summer with some graduating friends. hope i can get the car ready for that.
they're havin a pinks all out at route 66 this year.
i plan on goin to that just to watch. pretty sure a 13 second car wont make the show.

but that would be a good time to make a road trip there and rich's events are pretty cool. i went to arm drop last year
Reply
Old Mar 4, 2010 | 10:23 PM
  #118  
BlueZee28's Avatar
Supreme Member
15 Year Member
iTrader: (30)
 
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: Third Gen Fest '10'

Originally Posted by xpndbl3
this is how I usually roll up to thirdgenfest.....with about 10-15 thirdgens behind me everytime.



That's an awesome picture.


I have been riding the fence, I know I posted that I was going to be at the Atlanta Fbody gathering that weekend, but I'm short on money right now and Crete, IL is much closer to St Louis. The only thing is, being a moderator for Z28.com, there will be a lot of my friends at Atlanta, so I'm really trying to decide what to do here. If I go to Atlanta, I know I will be one of only a handful of 3rd gens in the midst of mostly 4th and 5th gens.
Reply
Old Mar 4, 2010 | 11:08 PM
  #119  
Orr89RocZ's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (20)
 
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: Third Gen Fest '10'

Yeah awesome pic. Car looks soo good on the trailer
Reply
Old Mar 5, 2010 | 04:09 AM
  #120  
racing geek's Avatar
Supreme Member
iTrader: (5)
 
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: Third Gen Fest '10'

[QUOTE=xpndbl3;4458121]this is how I usually roll up to thirdgenfest.....with about 10-15 thirdgens behind me everytime.

Name:  DSCN1712-1.jpg
Views: 53
Size:  133.7 KB[QUOTE/]

I don't think I have ever seen your car in action. In the pictures I've seen, it's always either just sitting there on the grass for a photo op or it's on your trailer probably going to the next grassy area. Do you ever drive the car? I mean like burnouts and wheelies or something?


By the way, pics or it didn't happen....
Reply
Old Mar 5, 2010 | 11:47 AM
  #121  
xpndbl3's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: Third Gen Fest '10'

hey man 14.2 at 92mph isn't that bad for my car right?
So basically you're looking for pics like this right? Sitting next to the trailer on the grass.


that better?

around town....

at the track again...

ohhhh and what i did right in front of thirdgenfest one year.


better now? I just get double the mileage when trailering it, so why not?
Reply
Old Mar 5, 2010 | 06:08 PM
  #122  
Mitch91Z28's Avatar
Member
 
Joined: Sep 2006
Posts: 170
Likes: 1
From: Syracuse, UT
Car: 1991 Vert Z28
Engine: 305... LS1 waiting to drop in
Transmission: 700-R4... soon 4L60E
Axle/Gears: 3.08 posi nine bolt
Re: Third Gen Fest '10'

Dang, I dont think my vert would survive a 21 hour drive just yet...
Reply
Old Mar 6, 2010 | 07:22 AM
  #123  
racing geek's Avatar
Supreme Member
iTrader: (5)
 
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: Third Gen Fest '10'

Yup, I have to say that first pic is my favorite. It's just so unique that it's hard not to like it. lol

What times are you really running? 1.1xxx?






There's only one way to find out if the vert will survive. I say do it but tend to say sure to a lot of things...
Reply
Old Mar 6, 2010 | 06:09 PM
  #124  
xpndbl3's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: Third Gen Fest '10'

i don't post times, but I can say that I'm slow, so slow in fact find me at the dragstrip and spot me WAYYY out.
Reply
Old Mar 8, 2010 | 11:44 PM
  #125  
Roc THIS's Avatar
Member
 
Joined: Feb 2009
Posts: 224
Likes: 0
From: Plainfield IL
Car: 87 Yellow Iroc-Z
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: BW 9 bolt
Re: Third Gen Fest '10'

Well count me in now . Sold the S10 and got a 87 Z.
Reply
Old Mar 9, 2010 | 02:28 PM
  #126  
sakattack28's Avatar
Junior Member
 
Joined: Apr 2009
Posts: 73
Likes: 0
From: Milwaukee, WI
Car: 1991 Camaro RS
Engine: 305 TBI
Transmission: T-5
Axle/Gears: Stock
Re: Third Gen Fest '10'

i guess we need to gather up more people from our area, get a convoy going down from the western burbs? cant have much of a convoy with two camaros, eh mark?
Reply
Old Mar 9, 2010 | 04:13 PM
  #127  
xpndbl3's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: Third Gen Fest '10'

i run a caravan from my house down to it, as seen in the photos above, i get tons of people coming out of the woodwork from all over to do this.
Reply
Old Mar 9, 2010 | 07:08 PM
  #128  
anthony714's Avatar
Senior Member
iTrader: (5)
 
Joined: Jan 2005
Posts: 883
Likes: 0
Re: Third Gen Fest '10'

orr89,ive seen the clips of your car in action and im an older dude but i still get wet dreams thinking of blasting down the strip in 9 seconds in your car.id love to go for a ride at third gen fest and the cops are taken care of,no worries there.i will start a campaign to have your ride transported up here anyway it takes. if need be we bop over to joliet strip.
i want to second the above motion,keep them fords at least 2 miles away and park them 4th gens in front of the fords but still 1.98 miles away.its third gen fest. let them start 4th gen fest and fordfest if they want.
Reply
Old Mar 9, 2010 | 07:29 PM
  #129  
Orr89RocZ's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (20)
 
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: Third Gen Fest '10'

Originally Posted by anthony714
orr89,ive seen the clips of your car in action and im an older dude but i still get wet dreams thinking of blasting down the strip in 9 seconds in your car.id love to go for a ride at third gen fest and the cops are taken care of,no worries there.i will start a campaign to have your ride transported up here anyway it takes. if need be we bop over to joliet strip.
i want to second the above motion,keep them fords at least 2 miles away and park them 4th gens in front of the fords but still 1.98 miles away.its third gen fest. let them start 4th gen fest and fordfest if they want.
Haha thanks. It sure is alot of fun Car flat hauls but I wont be satisfied until it touches high 8's. It may have enough turbo to do so on race gas but I want to do it on a pump gas/meth injection mix if all possible. We shall see.

If I can make it up there, I will give you a ride. Just keep my seats clean But I'm sure everyone will want a rdie at that point haha

Car is in Pittsburgh so its only 8 hours away I will see what I can do.
Reply
Old Mar 9, 2010 | 08:23 PM
  #130  
anthony714's Avatar
Senior Member
iTrader: (5)
 
Joined: Jan 2005
Posts: 883
Likes: 0
Re: Third Gen Fest '10'

orr,all the cars are unique in their own way but watching them videos and listening to,and concentrating on the sounds of them runs is incredible. yes theres always a faster car but man........thats close to a true street car. i know "any" car can be a street car but yours seems like you can open the garage,turn key and drive it all night in the 9s w/o touching a thing.. thats flat out incredible.love how its kinda "slow" off the line but then just screams when the boost kicks in.you can tell by the way you just flat out fly past those other cars. well done my freind.
Reply
Old Mar 9, 2010 | 08:35 PM
  #131  
Orr89RocZ's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (20)
 
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: Third Gen Fest '10'

Thanks again. That was the goal with this car. Some bugs to work out but how i drive it on the street is how it runs at the track...minus the wheel change for the track and some changes to the shock settings. The goal later this year is I hope to add drag radials to my street rims and beable to drive in the track, lay down mid 9's and go home without changing anything
Reply
Old Mar 10, 2010 | 12:25 PM
  #132  
Roc THIS's Avatar
Member
 
Joined: Feb 2009
Posts: 224
Likes: 0
From: Plainfield IL
Car: 87 Yellow Iroc-Z
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: BW 9 bolt
Re: Third Gen Fest '10'

Originally Posted by xpndbl3
i run a caravan from my house down to it, as seen in the photos above, i get tons of people coming out of the woodwork from all over to do this.
Hmm maybe me and Dan will join yours . Orland is not far at all. What time do you guys usually head out ?
Reply
Old Mar 10, 2010 | 01:05 PM
  #133  
xpndbl3's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: Third Gen Fest '10'

uhm 10:15-ish i think, guys show up earlier to BS for a while, then we all run down there. Takes around 35 minutes or so taking normal streets instead of the highway so we can all get together. Stop on the main street of my subdivision for some sweet pics every year as well. Here's some pics from when I had my enclosed trailer along with a shot from the top of the trailer looking down at the row of cars.
Attached Thumbnails Third Gen Fest '10'-dscn2134.jpg   Third Gen Fest '10'-dscn2145.jpg  
Reply
Old Mar 10, 2010 | 03:49 PM
  #134  
sakattack28's Avatar
Junior Member
 
Joined: Apr 2009
Posts: 73
Likes: 0
From: Milwaukee, WI
Car: 1991 Camaro RS
Engine: 305 TBI
Transmission: T-5
Axle/Gears: Stock
Re: Third Gen Fest '10'

that would be pretty sweet. it would be worth meeting up with you guys no matter how far i would have to go out of my way.
Reply
Old Mar 11, 2010 | 12:56 AM
  #135  
Roc THIS's Avatar
Member
 
Joined: Feb 2009
Posts: 224
Likes: 0
From: Plainfield IL
Car: 87 Yellow Iroc-Z
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: BW 9 bolt
Re: Third Gen Fest '10'

Well hopefully I can join that convoy. My sisters highschool graduation thing is that morning so I might be making the trip alone if that does not end soon .
Reply
Old Mar 14, 2010 | 07:04 PM
  #136  
Blind Driver's Avatar
Senior Member
 
Joined: Nov 2009
Posts: 419
Likes: 1
Car: 1986 Trans Am
Engine: 5.0
Transmission: 700r4
Axle/Gears: beats me
Re: Third Gen Fest '10'

Originally Posted by Thirdgen Ranch
Thirdgen Fest is held every Memorial Day weekend in Crete, IL which is about 40 minutes south of Chicago.

It looks like Thirdgen Fest 2010 will be held on Saturday, May 29th.

Hopefully, we'll see you there!!!
I'm going to do my best to be there.

Originally Posted by mister_hudson
I seriously doubt that my F-Body will be in good enough condition to bring up by then... I will do my best to make it anyways - with or without my Camaro! I missed it last year due to a deployment
It's going to be close enough to Chitown that there WILL be rustier cars there
Reply
Old Mar 15, 2010 | 04:23 PM
  #137  
gearhead0384's Avatar
Supreme Member
iTrader: (7)
 
Joined: Jul 2002
Posts: 1,948
Likes: 2
From: Chicago
Car: 1989 Camaro IROC-Z
Engine: L98 350 TPI
Transmission: Built TH-700 R4 (Vilgilante 2800)
Axle/Gears: 9 bolt w/ PBR's
Re: Third Gen Fest '10'

I guess I will have to post now. Man I cant wait.

Steve's car might lead us there but mine is usually the First car in line that drives. haha I mean if lead Steve would not be able to keep up. BTW who's Nice looking IROC is that in those pics you posted?

Hopefully we will have a caravan of cars like we did a few years ago.

I am already planning what I should do to my car before thirdgen fest this year...
Reply
Old Mar 15, 2010 | 06:43 PM
  #138  
Blind Driver's Avatar
Senior Member
 
Joined: Nov 2009
Posts: 419
Likes: 1
Car: 1986 Trans Am
Engine: 5.0
Transmission: 700r4
Axle/Gears: beats me
Re: Third Gen Fest '10'

Are we getting a discount at the local hotels?
What about camping facilities?
Reply
Old Mar 16, 2010 | 11:57 AM
  #139  
sethteef's Avatar
Member
 
Joined: Feb 2010
Posts: 111
Likes: 0
From: Jerseyville, IL
Car: 88 firebird
Engine: 305 TPI
Re: Third Gen Fest '10'

Well depending if get everything done or not will be a big factor if I can go or not. Well maybe if I can get the cowl hood, a new fender, paint and maybe the headers. I dont want a car that not all the same color sitting next to all the nice ones. If I get it done I think my car could make the like six hour drive fromt the stl area.
Reply
Old Mar 16, 2010 | 02:06 PM
  #140  
xpndbl3's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: Third Gen Fest '10'

trust me there's PLENTY of cars that have mismatched paint at this show. One year I brought basically a bare shell with a cage in it . No doors no hood no fenders no hatch. Still was good times.
Reply
Old Mar 16, 2010 | 02:07 PM
  #141  
racing geek's Avatar
Supreme Member
iTrader: (5)
 
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: Third Gen Fest '10'

Who cares what your paint looks like. In my opinion, it's just uneeded weight. If my vehicles wouldn't rust without paint I would be running plane metal for sure. Going along with that, paint it white to save weight. White should theoretically be lighter because there aren't any pigments in the paint.

Seriously though, the paint on my car looks like **** up close but I still took it there last year and got many compliments on the car. People easily look past the paint to notice that one thing (or more) that sets one car apart from another. No matter the state the vehicle is in they are still awesome cars. I'm actually thinking about going this year without any interior other then seat belts, a dash and front seats since I have a race the following Sunday and likely won't have time to get it all back out.
Reply
Old Mar 16, 2010 | 03:25 PM
  #142  
Thirdgen Ranch's Avatar
Former Sponsor
iTrader: (5)
 
Joined: Apr 2009
Posts: 823
Likes: 1
From: Crete, IL
Car: Too many
Re: Third Gen Fest '10'

Originally Posted by sethteef
Well depending if get everything done or not will be a big factor if I can go or not. Well maybe if I can get the cowl hood, a new fender, paint and maybe the headers. I dont want a car that not all the same color sitting next to all the nice ones. If I get it done I think my car could make the like six hour drive fromt the stl area.

Don't worry about how your car looks. There's usually quite a few cars in rough condition here every year. We also try to group cars together with others in similar condition so you won't have to worry about being parked next to the nicest cars here.
Reply
Old Mar 16, 2010 | 03:37 PM
  #143  
sethteef's Avatar
Member
 
Joined: Feb 2010
Posts: 111
Likes: 0
From: Jerseyville, IL
Car: 88 firebird
Engine: 305 TPI
Re: Third Gen Fest '10'

I know it shouldnt bother me but it would. The hood and fender should be on within the month. I could probably get painted in time but I am not sure should be warm enough now. So if I didnt get it done I would have black hood, black fender, gray primer on a back quarter panel, and the faded blue colors. With brand new shiny rims ...
Reply
Old Mar 17, 2010 | 03:54 AM
  #144  
firebird896's Avatar
Senior Member
 
Joined: Sep 2007
Posts: 617
Likes: 0
From: Chicagoland Area
Car: '89 GTA/'86 TA/98 TA
Engine: 350/350/LS1
Transmission: R4/T5/4L60E
Axle/Gears: 3.23/2.77/3.73
Re: Third Gen Fest '10'

Originally Posted by Blitzkrieg91
lol its an idea but...my parents would kill me lol. its all good. im going to take it next year and to as many other shows as i can. plan on a Route 66 Road Trip this summer with some graduating friends. hope i can get the car ready for that.
Hey bud when are you guys planning on doing this, I'll be doing the hot rod power tour then coming back up here for maybe a day, Then Im driving out to L.A. for a reunion.

I should be coming to this since my car will be ready....I Hope....the only thing(s) I need to finish up are fixing the quarter panels, new door and t-top weatherstripping, and paint. I also have to make sure its not going to fail for the 1 hour + drive.
Reply
Old Mar 21, 2010 | 09:49 AM
  #145  
GMCRACER's Avatar
Junior Member
 
Joined: May 2008
Posts: 50
Likes: 0
From: Monee, IL.
Car: 88 Camaro
Engine: 523 BBC
Transmission: TH 400
Axle/Gears: 3.82 9"
Re: Third Gen Fest '10'

Originally Posted by xpndbl3
i don't post times, but I can say that I'm slow, so slow in fact find me at the dragstrip and spot me WAYYY out.

What do you need now that I am N/A and on E85?

Street Car Chaos is the Sunday after TGF...

Reply
Old Mar 21, 2010 | 09:30 PM
  #146  
xpndbl3's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: Third Gen Fest '10'

i need about 150 cubes George
Reply
Old Mar 22, 2010 | 04:26 AM
  #147  
GMCRACER's Avatar
Junior Member
 
Joined: May 2008
Posts: 50
Likes: 0
From: Monee, IL.
Car: 88 Camaro
Engine: 523 BBC
Transmission: TH 400
Axle/Gears: 3.82 9"
Re: Third Gen Fest '10'

Originally Posted by xpndbl3
i need about 150 cubes George

and they say size doesn't matter...
Reply
Old Mar 22, 2010 | 05:02 AM
  #148  
xpndbl3's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: Third Gen Fest '10'

hmm 523 - 346 = 177 cubes...my math is a little fuzzy

I don't think I'll be within a second of you on E85 or not, I don't stand a chance talk a bout bringing a pool noodle to a gun fight
Reply
Old Mar 22, 2010 | 05:59 AM
  #149  
GMCRACER's Avatar
Junior Member
 
Joined: May 2008
Posts: 50
Likes: 0
From: Monee, IL.
Car: 88 Camaro
Engine: 523 BBC
Transmission: TH 400
Axle/Gears: 3.82 9"
Re: Third Gen Fest '10'

Originally Posted by xpndbl3
hmm 523 - 346 = 177 cubes...my math is a little fuzzy

I don't think I'll be within a second of you on E85 or not, I don't stand a chance talk a bout bringing a pool noodle to a gun fight

Isn't this where I am supposta say you have a 15 deg head vs my 23, your car is lighter, I have a nitrous cam, ummmm.... You have a 4.10 gear, my car is Orange, you're younger...

Been hanging around Chitown too much, huh... lol
Reply
Old Mar 22, 2010 | 06:12 AM
  #150  
xpndbl3's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: Third Gen Fest '10'

Lol but but but, my pistons are soooo tiny.....i'm in awe of your big pistons.....


how about this for a fair race, I'll launch, you start your engine then chase.....that'll make up the difference for sure
Reply



All times are GMT -5. The time now is 11:16 AM.