TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

where to buy prom burner? ecm 1227730 & 1227727

Thread Tools
 
Search this Thread
 
Old Dec 29, 2002 | 07:56 PM
  #1  
IDOXLR8's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2002
Posts: 48
Likes: 0
From: UTAH
where to buy prom burner? ecm 1227730 & 1227727

I am interested to buy the stuff to burn and edit prom chips for 1227730 and 1227727 ECMs what way is the best? this is all new to me so any help would be appriciated
Reply
Old Dec 29, 2002 | 08:03 PM
  #2  
btcamaro's Avatar
Junior Member
20 Year Member
 
Joined: Sep 2002
Posts: 93
Likes: 0
Car: 91 Camaro
Engine: 383
Transmission: 700r4
go to the diy prom board and read the introduction to prom burning. this is the very first post on that board you will get all the info that you need.
Reply
Old Dec 29, 2002 | 08:14 PM
  #3  
IDOXLR8's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2002
Posts: 48
Likes: 0
From: UTAH
yes I read through all that and that is what made me decide to burn my chips but I know there are a few differant setups to use so I was hoping to get some more info about it
Reply
Old Dec 29, 2002 | 09:08 PM
  #4  
btcamaro's Avatar
Junior Member
20 Year Member
 
Joined: Sep 2002
Posts: 93
Likes: 0
Car: 91 Camaro
Engine: 383
Transmission: 700r4
i am using the pocket programmer and tunercat without any problems so far.
Reply
Old Dec 30, 2002 | 07:40 PM
  #5  
jmd's Avatar
jmd
Supreme Member
25 Year Member
Liked
Loved
Community Favorite
iTrader: (4)
 
Joined: Jul 2000
Posts: 6,531
Likes: 94
From: Aridzona
Car: `86 SS / `87 SS
Engine: L69 w/ TPI on top / 305 4bbl
Transmission: `95 T56 \ `88 200-4R
I've been using the pocket programmer II and winbin and tunercat with success. Can't go wrong with those items; Karl is usually available on the phone.
Reply
Old Dec 30, 2002 | 07:55 PM
  #6  
IDOXLR8's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2002
Posts: 48
Likes: 0
From: UTAH
well it sounds like the pocket programer is the way to go how do I get a hold of Karl?
Thanks
Reply
Old Dec 30, 2002 | 08:30 PM
  #7  
IDOXLR8's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2002
Posts: 48
Likes: 0
From: UTAH
thanks guys for the help I read through the sticky post and cought a bunch of stuff I missed the first time I think I should have everything I need for now at least until I start to burn
Thanks again for the help
Reply
Old Jan 1, 2003 | 11:43 AM
  #8  
scorp508's Avatar
Member
 
Joined: Mar 2002
Posts: 277
Likes: 1
From: Boston, MA
Car: Corvettes
Engine: Modified L98 & LT5
Transmission: DN 4+3 & ZF6
Axle/Gears: 3.07 & 4.10
I bought my PP2 from www.xtronics.com
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
skeltor
DFI and ECM
17
Feb 2, 2016 10:37 AM
Ranbo108
Tech / General Engine
14
Sep 9, 2015 12:20 PM
Jlanz55
DFI and ECM
3
Sep 8, 2015 11:28 PM
Street Lethal
Miscellaneous Third Gen Items!
0
Sep 7, 2015 01:09 PM




All times are GMT -5. The time now is 07:20 AM.