TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.

Sponsored by:

head gasket part # ? QUICK!

Reply Subscribe

Search this Thread

Old

Mar 29, 2003 | 10:33 AM

#1

Thread Starter

Supreme Member

Joined: Mar 2003

Posts: 1,301

Likes: 0

From: Severn, MD.

Car: '88 T/A and '90 T/A

Engine: LB9/383

Transmission: T5/700R4

head gasket part # ? QUICK!

I'm looking for a part number for a good head gasket for an L98 with aluminum vette heads and 10.5:1 compression. I'm taking it apart today and I don't want to put stock stuff back in if there's something better out there. Thx.

Old

Mar 29, 2003 | 12:14 PM

#2

Supreme Member

Joined: May 2000

Posts: 2,963

Likes: 3

Car: 1982 Z28

Engine: LS1

Transmission: T56

FelPro 1010 is a common choice for iron block + aluminum head applications.

Make sure your head surfaces are completely flat and straight, same for the block.

Old

Mar 29, 2003 | 09:31 PM

#3

Member

Joined: Mar 2002

Posts: 277

Likes: 1

From: Boston, MA

Car: Corvettes

Engine: Modified L98 & LT5

Transmission: DN 4+3 & ZF6

Axle/Gears: 3.07 & 4.10

I also use a Felpro 1010 on my '87 vette with aluminum heads. Good stuff!

Reply Subscribe

Related Topics

Thread

Thread Starter

Forum

Replies

Last Post

1992 camaro 305 v8 TBI idles very high and shifts at high idles

db057

TBI

34

Jan 21, 2023 01:13 AM

350 (Bored 0.040 Over) Head Gasket Size/Thickness?

NinjaNife

Tech / General Engine

27

Aug 23, 2015 11:49 AM

Missing diverter valve?

lakeffect2

Cooling

11

Aug 23, 2015 08:44 AM

Need advice on a "chip"

NWAsonoma

TBI

4

Aug 18, 2015 05:45 PM

[WA] Edelbrock 1406 600 CFM carb, Holley AFPR, gauge..

86IROC112

Engine/Drivetrain/Suspension Parts for Sale

4

Aug 17, 2015 02:00 PM

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 07:14 AM.