What do i need
Thread Starter
Junior Member
Joined: Apr 2003
Posts: 55
Likes: 0
From: Carol Stream IL
What do i need
Ok here is what i have-
92 RS 305TBI with a newly rebuilt 700r4 and a new flowmaster exhaust.
I would like to build a 350TPI and i'm kinda confused as to what i would need to convert it to a 350TPI. It doesn't have to be stock in fact i would like to be up and around 325hp at the rear wheels. Whatever i decide to get i'm definatly going to go with a compcam and some slp 1 3/4headers. I'm just basicly looking for a list of parts and estimates of prices for new parts. I'm eventhinking that the motor is going to be new.
Thanks in advance for all your help.
92 RS 305TBI with a newly rebuilt 700r4 and a new flowmaster exhaust.
I would like to build a 350TPI and i'm kinda confused as to what i would need to convert it to a 350TPI. It doesn't have to be stock in fact i would like to be up and around 325hp at the rear wheels. Whatever i decide to get i'm definatly going to go with a compcam and some slp 1 3/4headers. I'm just basicly looking for a list of parts and estimates of prices for new parts. I'm eventhinking that the motor is going to be new.
Thanks in advance for all your help.
Supreme Member
Joined: Nov 2001
Posts: 4,456
Likes: 3
From: Ocean, NJ
Car: Check The Sig
i would do a search on it. It has been brought up, but basicly you need the whole tpi set up with harness and ECU if you dont wana cut up the one you got, new knock sensor, 22# injectors, multitude of sensors and relays... there is also a tech article on the front page of this site.
Supreme Member
Joined: Nov 2001
Posts: 4,456
Likes: 3
From: Ocean, NJ
Car: Check The Sig
yea you do. TPI needs a lot more pushin behind the cushin (???) so getting an inline fuel pump should fix whatever problems you might run across. could be wrong thought.. if i am, you got to drop the tank and put in a tpi pump.