Need a little help with getting SVO injectors...
Thread Starter
Supreme Member
Joined: Oct 2002
Posts: 1,042
Likes: 0
From: Oklahoma City, OK
Car: 92 Z28
Engine: 357 TPI (L98)
Transmission: 700R4
Need a little help with getting SVO injectors...
My injectors are going out on my 92 TPI 350, and I've done some research on here and am concluding that the orange SVO 19lb injectors will work best for me. What's most important is that I don't want to have to have another chip burned YET. so the closest I can get to the stock 22lb is best. Correct me if I'm wrong, but I ruled against the Accel 24-pounders and the SVO 24-pounders because it would run really rich. I'm going to get the 19lb SVO's because I've learned that GM fuel pressure is higher than what these were rated at, so they will be closer to 21lb. If I get an AFPR and turn it up a bit, I should be able to get close to 22lb, correct. I know this is not an exact solution, but its better than the alternatives, yes?
My next question is, where is the best place to get a GREAT price on the SVO's? I've heard of some guys getting them for less than 100 buck shipped, but I've only been able to find them for like 175 before shipping.
Were the SVO 19lb-der's a good choice for my application and where should I buy them from? Thanks a lot guys.
My next question is, where is the best place to get a GREAT price on the SVO's? I've heard of some guys getting them for less than 100 buck shipped, but I've only been able to find them for like 175 before shipping.
Were the SVO 19lb-der's a good choice for my application and where should I buy them from? Thanks a lot guys.
Thread Starter
Supreme Member
Joined: Oct 2002
Posts: 1,042
Likes: 0
From: Oklahoma City, OK
Car: 92 Z28
Engine: 357 TPI (L98)
Transmission: 700R4
Yeah I've been there and they wanted like 220 or something for new ones and 175 for used ones. Anybody else know a good place to look? Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Rob P
Aftermarket Product Review
8
Apr 30, 2001 04:57 PM
vortech305
Aftermarket Product Review
7
Mar 1, 2001 02:34 AM





