TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

What Would You Do?

Thread Tools
 
Search this Thread
 
Old Sep 1, 2003 | 12:24 PM
  #1  
JC92rs's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2003
Posts: 6
Likes: 0
From: Columbia, S.C
What Would You Do?

I HAVE A 92 CAMARO Z-28 5SP. I ALREADY HAVE A 350 BORED .30 OVER AND AFPR, FLAT TOP PISTONS, SMALL CAM,K/N'S,MODIFIED AIR BOX,SHORT THROW SHIFTER.EVERYTHING ELSE IS STOCK.
WHAT SHOULD I DO NEXT?
Reply
Old Sep 1, 2003 | 01:43 PM
  #2  
8Mike9's Avatar
Supreme Member
 
Joined: Jul 1999
Posts: 5,183
Likes: 42
From: Oakdale, Ca
Car: 89 IrocZ
Engine: L98-ish
Transmission: 700R4
Two things...

First, tap on the "caps" key


Then exhaust and intake.
Reply
Old Sep 1, 2003 | 02:21 PM
  #3  
bigals87z28's Avatar
Supreme Member
 
Joined: Nov 2001
Posts: 4,456
Likes: 3
From: Ocean, NJ
Car: Check The Sig
Originally posted by 8Mike9
Two things...

First, tap on the "caps" key


Then exhaust and intake.
all that and a bag of chips...


looks like you got yourself a nice car. exhaust (headers, cat if needed, cat back).
Porting the plenum. Doesnt cost much if you have the tools already... get new gaskets at port match the runner openings to the gasket. all you really need is a dremmel with a bit. Grind down the EGR walls and other restrictions. That will give you a little more top end. Also, you might want to look into a set of slp runners for more breathing... and then if you really need it, a new intake base... or port the old one. Good tires, a TA rear end girdle for strenght.
Reply




All times are GMT -5. The time now is 10:29 PM.