I'm swapping from a carb to an HSR and have a question. I see that people sell kits to connect the stock TPI fuel hard line to the HSR fuel rail. Would one of these kits also work to connect the fuel rail to the stock carb hard line? So basically waht I'm wondering is if the hard lines have different ends on them between tpi and carb cars, I realize I will have to route it differently b/c the lines run down opposite sides of the car. Thanks for any help!

 

No. You will need hard line to -6 inverted flare adapters. The TPI kits are made to be threaded into the stock hoses, which you don't have. Don't forget you will need a return line if don't already hava one.

 

I have a return line, carb'd cars came w/ them to avoid vapor lock. Thanks for your help!