Does anyone still have the info on Accel, SLP,stock,superram flow numbers. I remember along time ago someone posted a comparison of the runners, TPI intakes. It listed the cfm and length of the runners from aftermarket companies.
I trying to find the flow numbers for a stock ported tpi intake compared to a aftermarket tpi intake.Is it worth getting one?

 

All the numbers and info you need are contained in these below links:-

Flow Number Comparisons and Port Sizes
http://www.stealthram.com/flowcomparison.html

Rnner length and effect on powerband
https://www.thirdgen.org/techbb2/sho...r+flow+numbers

What does the stock TPI flow?
https://www.thirdgen.org/techbb2/sho...r+flow+numbers

Flow numbers for aftermarket TPI intakes?
https://www.thirdgen.org/techbb2/sho...r+flow+numbers

Aftermarket TPI Intakes?
https://www.thirdgen.org/techbb2/sho...r+flow+numbers

TPI runner and manifold sizes
https://www.thirdgen.org/techbb2/sho...r+flow+numbers

Flow numbers for tpi manifolds.....
https://www.thirdgen.org/techbb2/sho...r+flow+numbers

 

I vote to make this a Sticky! This gets asked once a day it seems like... No offense ment to the original poster.

 

Interesting links and thank you for taking the time to post them. However I see nothing on the flow numbers for the SLP runners and the stock Edelbrock TPI base. Allen

 

Ditto

 

You're more than welcome! I don't see the point in saying to people "Do a search", if you already have most of the details or know where to find them. It is a very common topic that seems to crop up time and again.

 

Thanks everyone for the input. I do agree with the ever asking questions "what's the best runner/intake?" and "what's the best subframe connector?". If someone can't stand the sight of these posts, I find the best solution is not to reply.