Ok dumb question, but how do I get the frigging fuel rails off?? I took out 4 bolts, removed the 2 rubber fuel lines. Do I just pull up and they come off, or am I missing something somewhere... I really don't want to bust a fuel injector.

Thanks

 

They are being held in place by the injector o-rings. Gently pry up with a large flat tip screwdriver on the rails.

 

I hope, since you removed the flex hoses. That you also removed the bolt holding the metal lines for the fuel rail to the intake manifold. If you have, then just do as 89Formula5.7 mentioned and gently pry up on the rails with a large flat tip screw driver.

 

Where in the heck are some of ya'll getting these diagrams.. I want em too.

 

Well hello Thecoolone,

I get mine from the GM service manual I have scanned into my computer. You can get the mauals from Helm Incorporated. Go to the link listed below. When you go to their website, at the top of the page you will see the names of several manufacturers. Click on General Motors and then click on either chevrolet or pontiac and then use the pull downs to find your car listed.

http://www.helminc.com/helm/welcome_...MAV6HD8UAQDKS6

 

awesome.

and out of stock.