I have a TPI 350, which I have just installed to replace my old TPI 350, when I started putting everything back together, I forgot how all the vacuum lines were hooked up. Can anyone provide me with any information which may help. A diagram would be great.

 

What year car?

 

You'll have the PCV valve from valve cover to nipple on intake. Brake booster to rear corner nipple on plenum. Other side you have FPR to one of the side nipple and then you will have the other nipple for the cruise and inside items. pass side valve cover breather goes to top port on TB and canister goes to lower port. Egr goes from bottom of TB to soloniod(sp) and then one to the egr. I think thats about it.

 

The car is an '89 Formula

 

Dont forget the heater vent vacumm line near the pass. side of the distributor.