Problems with VSS after TPI swap
Thread Starter
Former Sponsor
iTrader: (1)
Joined: Feb 2002
Posts: 1,081
Likes: 3
From: Florida
Car: 1992 Camaro RS
Engine: Yet another 350 TPI
Transmission: Borg Warner 6 spd
Axle/Gears: 3.73
Problems with VSS after TPI swap
I finished my TPI swap recently, and my speedometer is working correctly, but my datalogs show 0 mph all the time. Apparently the ecm is not receiving the VSS signal. I still have the Buffer in the car as it was with the L03, and I am running a Dakota Digital SGI-5 box since I have a T56. I have the VSS wire going to pin C6 on the ecm. From what I've searched, thats where it should be. Anyone have any ideas?
Thread Starter
Former Sponsor
iTrader: (1)
Joined: Feb 2002
Posts: 1,081
Likes: 3
From: Florida
Car: 1992 Camaro RS
Engine: Yet another 350 TPI
Transmission: Borg Warner 6 spd
Axle/Gears: 3.73
Figured the problem out. I just needed to uncheck the Magnetic Speed Sensor flag. Working fine now.
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM
