Sequential fire in 87
Thread Starter
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 844
Likes: 0
From: Long Island, NY
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
Sequential fire in 87
I am re-assembling a TPI (superam) and I put hte injector plugs on the injectors in no particular order, except that I put the pass side on the pass side and visa versa. I was told that 87 MAF TPI doesn't have sequential portjection, just batchfire, which i guess fires the passsenger "batch" of injectors at once and then fires the driver side injectors....hope this is right, cause I ain't pulling that SR apart again! (I hope) please advise 
Supreme Member
Joined: Feb 2005
Posts: 1,054
Likes: 1
From: Ajax, ON
Car: 85Z28 87GTA 91GTA 98SS
Engine: SBC, LS-x
Transmission: T-5, 700-R4, T-56
Re: Sequential fire in 87
Originally posted by Justin 87 GTA
I am re-assembling a TPI (superam) and I put hte injector plugs on the injectors in no particular order, except that I put the pass side on the pass side and visa versa. I was told that 87 MAF TPI doesn't have sequential portjection, just batchfire, which i guess fires the passsenger "batch" of injectors at once and then fires the driver side injectors....hope this is right, cause I ain't pulling that SR apart again! (I hope) please advise
I am re-assembling a TPI (superam) and I put hte injector plugs on the injectors in no particular order, except that I put the pass side on the pass side and visa versa. I was told that 87 MAF TPI doesn't have sequential portjection, just batchfire, which i guess fires the passsenger "batch" of injectors at once and then fires the driver side injectors....hope this is right, cause I ain't pulling that SR apart again! (I hope) please advise
Thread
Thread Starter
Forum
Replies
Last Post