Edelbrock High Flo Base

Reply Subscribe

Thread Tools

Search this Thread

Mar 20, 2006 | 06:54 PM

TPI-Formula350-

Thread Starter

Supreme Member

Joined: Aug 2003

Posts: 1,644

Likes: 4

From: Long Island New York

Car: 89 Formula 350

Engine: Forged 385 H/C/I

Transmission: 700R4-4300 Stall-lockup

Axle/Gears: BW 9 Bolt 3:70

Edelbrock High Flo Base

Are any of you guys who have the edelbrock high flo base using after market heads? Is there a different edelbrock base for stock L98 heads then for aftermaket heads(see on edelbrocks site they have one for L98 and one for aftermaket heads)? Doesn't the base have a duel bolt pattern so it can be used on stock L98 heads and aftermarket??? Anyone running that base with Brodix 200Ik heads?? I just don't want to order heads and find out the won't work with that base........ Thanks

Mar 20, 2006 | 07:05 PM

1989GTATransAm

Supreme Member

iTrader: (3)

Joined: Sep 2003

Posts: 6,859

Likes: 14

From: Cypress, California

Car: 1989 GTA

Engine: 369 TPI

Transmission: 4L60E

Axle/Gears: 3.70 Nine Bolt

I'm running one with Trickflow heads. Will be running it on Dart Pro1 200cc heads. It can be run on stock heads. Regarding the Brodix heads see if they have the provision for EGR if you have to worry about smog. If they do not you would have to go to the Corvette style EGR setup.

Mar 21, 2006 | 09:40 PM

Dave Farr

Member

Joined: Feb 2005

Posts: 142

Likes: 0

I'm using it with Vortec heads on my truck works well but expensive.

Mar 22, 2006 | 12:20 AM

Kevin91Z

Moderator

iTrader: (1)

Joined: Jul 1999

Posts: 10,950

Likes: 26

From: Orange, SoCal

Car: 1990 Pontiac Trans Am

Engine: 355 TPI siamesed runners

Transmission: Tremec T56

Axle/Gears: 12-Bolt 3.73

One version is for Corvette heads with the older bolt pattern, the other style is drilled for both newer and older bolt patterns. And the third version they have now is for Vortec heads.