TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

can you guys help me, my cars loping all wierd...

Thread Tools
 
Search this Thread
 
Old Aug 5, 2006 | 01:03 PM
  #1  
carbed87's Avatar
Thread Starter
Member
 
Joined: Jan 2006
Posts: 310
Likes: 0
Car: 1991 t/a black on black
Engine: 350 tpi
Transmission: 7hunR4
can you guys help me, my cars loping all wierd...

IS THIS BAD...
ok so i have a 91 t/a, l98 with a paxton sn-89 blower on it. the way the breather system works is the left and right valvecover tie together then circulate into the front of the air cleaner.

anyways, so last night i was romping on it quite a bit, and noticed that it was smoking out of the hood a little bit... no big deal, just some oil on the valvecover (my driverside breather doesn't seal too good) so we drive home and all the sudden it starts running REALLY rough at idle, kinda like it has a cam or something, so this morning i take a look at it and don't find any vacume leaks, and i thought i might have fouled a plug, but i still have plenty of power, so i was stumped...

so i pulled of the air cleaner to find a trail where oil had been going through the intake system, supercharger and everything.

so my question is: have i found my problem, could oil going into the intake make my car run rough, am i going to have to tear my motor apart and clean it out or can it just burn off.

please help guys, i don't know what the hell im supposed to do here, so any input would be appreciated. THANKS,

mike
Reply
Old Aug 6, 2006 | 05:06 PM
  #2  
carbed87's Avatar
Thread Starter
Member
 
Joined: Jan 2006
Posts: 310
Likes: 0
Car: 1991 t/a black on black
Engine: 350 tpi
Transmission: 7hunR4
is this blowby...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MustangBeater20
TBI
11
Oct 29, 2022 09:20 PM
Spyder_TheGamer
Tech / General Engine
1
Dec 25, 2015 05:07 PM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
Aug 17, 2015 02:00 PM
bryan623
Auto Detailing and Appearance
2
Aug 10, 2015 11:33 AM




All times are GMT -5. The time now is 07:46 AM.