OK, here's the story; I got some fuel rails off a member a while back, and have been using them on my setup. After pulling the rails and putting em back on I wasn't getting any fuel at the Schrader valve. Finding out I had tons of flow at the lines, I start investigating more. They're full of mud wasp nests! Any idea on how to get em gone? I've been playing with this motor on a stand, and thought I had it running decent then swapped a cam in. I'm in a real rough spot with this right now, any help I could get would be greatly appreciated.

 

Remove the injectors, FPR, and clips/lines. Blow them out with compressed air and/or use a rifle brush to clean the mess out.

That has to be a first.