Just got back from the fabricators.
Click on the links below to see photos of the fuel rails and the material I had added on the passenger side of the TB inlet to aid in porting.
Details are:
-Lingenfelter fuel rail stock, 1/2" i.d.
-Rails are tapped for 3/8" npt fittings; I will be installing Earls 3/8 to -8AN fittings.
-Rail hold downs were counter-sunk and attached with stainless socket head bolts.
-Approximately 1/4" build up of aluminum added behind TB inlet to facilitate porting the TB inlet to maximum width.
-Costs of rails and material: $250
Will be porting TB inlet over the holidays, then will take intake and disassembled TB to powdercoaters.
Will post more pics then.
SC http://images.honesty.com/imagedata/...5/23004544.jpg http://images.honesty.com/imagedata/...5/23004546.jpg http://images.honesty.com/imagedata/...5/23004545.jpg

 

Fuel rails look nice, seems to be a good quality job.