Your opinions on the best aftermarket wiring harness, please!
Thread Starter
Member
Joined: Dec 2002
Posts: 102
Likes: 0
From: Concord, CA, United States of America
Car: 1979 Camaro Sport Coupe
Engine: 350 LM1 with 083 2.02/1.60 heads
Transmission: TH350, soon to be 2004R
Axle/Gears: 2.41, soon to be 3.42
Your opinions on the best aftermarket wiring harness, please!
This is for a stock 1989 L98. The stock wiring harness isn't in bad shape but since the engine is going into a 1979 Camaro I was considering an aftermarket one so that I can relocate the ECM. The car must retain ALL emissions equipment since I am in California.
Here are some of the ones I'm looking at (in no particular order):
1. Painless
2. TPiS
3. EFI Connection
4. TPI Parts
Thoughts, opinions, experiences? All are welcome!
Thanks guys!
Joel
Here are some of the ones I'm looking at (in no particular order):
1. Painless
2. TPiS
3. EFI Connection
4. TPI Parts
Thoughts, opinions, experiences? All are welcome!
Thanks guys!
Joel
Senior Member
iTrader: (1)
Joined: May 2007
Posts: 666
Likes: 0
From: Newport Beach, Ca.
Car: 1988 Iroc
Engine: 383 TPI
Transmission: 700r4
Axle/Gears: BW 9 bolt 3.27
Re: Your opinions on the best aftermarket wiring harness, please!
Always had good luck with Painless and they have a lot of direct fit wiring harnesses along with universal kits.
Junior Member
iTrader: (1)
Joined: Apr 2004
Posts: 77
Likes: 0
From: Florida
Car: 1989 Iroc-Z
Engine: 5.7L
Transmission: T-56
Axle/Gears: 3.70
Re: Your opinions on the best aftermarket wiring harness, please!
I have a 90-92 TPI Painless harness for sale. PM if interested.
Thread Starter
Member
Joined: Dec 2002
Posts: 102
Likes: 0
From: Concord, CA, United States of America
Car: 1979 Camaro Sport Coupe
Engine: 350 LM1 with 083 2.02/1.60 heads
Transmission: TH350, soon to be 2004R
Axle/Gears: 2.41, soon to be 3.42
Re: Your opinions on the best aftermarket wiring harness, please!
Gotta be MAF
Senior Member
Joined: Aug 2005
Posts: 615
Likes: 0
From: Beautiful Tunnel Hill Georgia
Car: 67 Firebird Convertible
Engine: LB9
Transmission: 700R4
Axle/Gears: 3.55
Re: Your opinions on the best aftermarket wiring harness, please!
This is for a stock 1989 L98. The stock wiring harness isn't in bad shape but since the engine is going into a 1979 Camaro I was considering an aftermarket one so that I can relocate the ECM. The car must retain ALL emissions equipment since I am in California.
Here are some of the ones I'm looking at (in no particular order):
1. Painless
2. TPiS
3. EFI Connection
4. TPI Parts
Thoughts, opinions, experiences? All are welcome!
Thanks guys!
Joel
Here are some of the ones I'm looking at (in no particular order):
1. Painless
2. TPiS
3. EFI Connection
4. TPI Parts
Thoughts, opinions, experiences? All are welcome!
Thanks guys!
Joel
S10Wildside at www.eficonnection.com is by far the best guy for the job. He did a TPI and the new 0411 harness for me. Both were superb.
He knows fbody stuff and how to make it fit right. Check out his site.
Ron
Thread
Thread Starter
Forum
Replies
Last Post
