where can i get a cheap aluminum driveshaft
what prices

------------------
1987 Camaro Iroc-Z Z-28 with a TPI 5.7
-Ram Air,K&N Filterchargers, Gutted Mass
Airflow Sensor, Throttle Body Airfoil,
Edelbrock TES Headers and Y pipe, Gutted
Cat, 3 inch exhaust, Flowmaster
-Hypertech Thermomaster Chip, 160 deg Stat,
Adjustable Fuel Pressure Regulator
set at 50 psi, MSD Cap, MSD 8.5mm wires,
Accel Coil, MSD 6AL Ignition Box, Accel
Plugs
-Richmond 3.73 Gears, B&M Transpak,
B&M Rachet Shifter, Energy Suspension
Products
-Fiberglass Cowl Induction Hood,
Purple Neon License Plate Frame,
16X8 Rims with BFG 245 50's,
Pioneer Deck, 2 JL 12's in a Q-Logic
Box with a 300 Watt amp

What you can put between your ears,
no one can take away.

 

There have been several on the forsale board. I scored two at the bone yard. I also got one at the Daytona swap meet last weekend but sold it to someone already.
Seems most fully loaded 89 IROCS got them as a weight saving measure. Thats what both mine came off of.

------------------
Rob P
89RSconvtZZ4TPI
Edelbrock Hi-Flow Intake
SLP Dual Cold Air Intake
1 5/8" Headers
Semi-Siamesed Runners
MSD6AL/relocated MAT/ AdjFPR/IROC frnt@rear swaybar/wonderbar/steeringbox/alum drvshaft/ Alston SFC/3:23posi disc rear/MAC LCA/H.Adams Panhard Rod/KYB struts/ shocks/
92Z28convt5spd
71Impala convt 402BB
BETTER DRIVING THRU SUPERIOR HORSEPOWER!

 

Third Gen classifieds, or Ebay have them from time to time. The cheapest I have seen them is around $150, but I don't know about boneyards, I guess it depends on the cigar chomper sitting behind the counter and whether he knows the signifigance of an aluminum driveshaft in our cars, or any car for that matter.

------------------
Kevin Irving
85 Trans Am WS-6, 305 TPI, custom burned '86 PROM with '87 "165"ECM, Accel Supercoil & 8.8 Wires, MSD 6AL, Aluminum Driveshaft, Wonderbar, TB Coolant Bypass, Ported Plenum, Modified MAF, Syclone Fuel Pump, JET Airfoil

15.556 @ 86.65mph, Nov 10, 2000.... I know it sucks.. but it will get better!

http://www.geocities.com/transam85tpi/

Member - The Tidewater Trans Am Club, Norfolk VA URL=http://www.geocities.com/ttacva/]http://www.geocities.com/ttacva/[/URL]

 

Hey just thought I would share, I happened to be on the TPIS site, god knows why, but I noticed in there garage area they are selling one for about $220 I think. I was also looking at the spohn site, and it mentioned something that if you have a lot of power, i'm thinking they're talking 500hp plus but could be wrong, that the weight saving of an alluminum is offset by its structural integrity. They offer ones that are not allum. but are much stronger than OEM shafts and are vibration free for use at high speeds good luck.

 

LS1.com for sale section, I see them all the time. I picked one up for $110 delivered! It's perfectly balanced and out of a 99 Z28.

------------------
87 Formula 350 13.94@96.67
98 Z28 1LE 13.15@107.59
1LE Owners Association

 

I hate those junkyard cigar chompers.
The more excited they see you about your find, the more they jack up the price.
Until you tell them you can get it cheaper at autozone

------------------
'88 RS (originally 2.8)
New 350, .040 over, ported vette L98s, ported stock tpi.
Old 305 injectors & chip
TES headers, 3.73 gears, 700r4.
Best with 2.8-17.4@77mph
Best with 305-15.0@93mph
Best with 356-13.7@101mph
(Damn the 2.8!)

 

hey travis i have a aluminum driveshaft for sale.. i bought not realizing that my car already had one!! i know how stupid of me as many times that i have been underthere doing stuff and didnt realize it.. email me if u are interested.. would really like to get rid of it..
stahlja@hotmail.com
look forward to hearing from u

------------------
1988 firebird ws6 formula350tpi ascd ram air hood GT AUTO 4th gen spoiler black paint with blue pearl centerline champ 500 16x8 all around potenza 245 50 16 on front and 27x11.5 16 mickey thompson sportsman pros on the rear(real sticky!!) msd 6al box blaster 3 coil accel 8.8 race wires hooker shorty headers hooker cat back system pro shift light A pillar gauge pod and water temp and air/fuel ratio gauges autometer oil pressure gauge b&m mega console shifter vette servo custom ram air system with a 9" K&N cone filter tb coolant bypass slp runners polished plenum and runners 170* thermostat smog pump and a/c delete plus cat delete march underdrive pullies, tpis airfoil cvr high torque starter (love it) aluminum drive shaft
best 1/4 mile run of 14.44@ 96.53
this run is before the new exhaust system new sticky tires coolant by pass smog removal new runners new thermostat and new three core radiator since i would get to the line and be well over 220* aluminum drive shaft and vette servo