TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

help....codes

Thread Tools
 
Search this Thread
 
Old Jul 20, 2001 | 10:25 PM
  #1  
GeneralHazzard's Avatar
Thread Starter
Junior Member
 
Joined: Aug 1999
Posts: 83
Likes: 0
From: Ridge, MD
help....codes

ok, yesterday i was cleaning my iac thing cause the car wasnt idleing good at all. had MAF off while doing it and whatnot. well today i started it up and it still didnt idle all thatgreat and i got a SES light. ran the codes with my handy dandy paper clip, and i got 33 and 36. i figure the 33 was from runing it without the MAF, but why am i getting the 36? what could be the cause of it? any help at all is REALLY apreciated
Reply
Old Jul 21, 2001 | 09:08 AM
  #2  
MikeInAZ's Avatar
Senior Member
 
Joined: Oct 1999
Posts: 735
Likes: 2
From: Portales, NM USA
Car: 86 T/A
Engine: 5.0 TPI
Transmission: 700R4
Both the 33 and 36 are MAF related. The 36 would indicate the BurnOff Relay. Since this happened after you removed the MAF I would double check the wires and connections.
Reply




All times are GMT -5. The time now is 07:38 PM.