A friend of mine was saying that roller tips tend to make a little more noise than the stockers and can set off the knock sensor, anybody had that problem?
*
Mine were a little more noisier on one side, so I readjusted them last night, tightening them down about 3/4 turn once rod was pressing down on lifter as opposed to the 1/4 to 1/2 turn I had done before, but didn't help much as far as the Knock was concerned.

------------------
Rob
High Performance & Party page
Pics of my rides past & present and recent party pics!

89 TTA #426 20th Anniversary turbo 3.8 bone stock
79 TA 6.6l - all original stock
94 Silverado Tuned Port Injected
87 Grand National- lil' ole V6, 12.40 @ 108 w/1.79 60'
95 Trans Am Conv.- LT1

 

yes its been known to cause false knock

take the knock sensor out of the block and wrap the threads with teflon tape and thread it in the block very easily and dont tighten it very much at all, that should help it