I have tried several ways of asking the search tab but I haven't found the one with the pictures yet. Help please.

 

Sorry cant help you with the picts but i see that you have an lb9 with a big mouth kit. how did that work out could you feel and increase in power and what fuel pressure/ injector size are you running.
I just purchased a big mouth kit for my lb9 5-speed.

 

Sadly It's not on yet, I was waiting on when I get the heads done, for the cam change. At that time, I plan on putting the drive train in to a 87 straight RS body I have, this should be in the next couple of months. Also Ive been told the stock tube runners will out flow the stock heads & the engine only has the little peanut (auto trans)cam in now. So there is no real rush. But I got good deals on near new the components. so when all is done it's time .watman you should have the better cam with the 5 speed car.

 

I finally typed in the right combination of words. Here is the address.
https://www.thirdgen.org/forums/tech...-pictures.html well mabe others can see it easier now too.

 

Are you just haveing the stock heads ported? and how big of a cam did are you using?

 

I'll be doing the porting. I've done 3 or 4 sets of sbc head in the past. the general pocket/ match porting job. The cam I have is a comp cams 8-300-8 262hr -12 It's not that that big. But with having to get the heads cut for bigger springs, I thought I might as well fire up the die grinder, burs & sanding cones.