tuning
Thread Starter
Junior Member
iTrader: (2)
Joined: Nov 2007
Posts: 46
Likes: 0
From: ottawa Ontario
Car: 1991 z28
Engine: 5.7l TPI
Transmission: 700r4
Axle/Gears: 3.73
tuning
i have been doing some reading up on turning my car. i have a 1991 z28 with a TPI on a l98 block, i have done some small enging work. 1.6/1 rockers, SLP runners, bigger injectors...
i found a chip that plugs in to the stock ECM and let you plug a laptop in to the data link port for tuning....
i have look through a lot of chats and can not seam to find it
does any one know what i am talking about or was i just dreaming
thanks
i found a chip that plugs in to the stock ECM and let you plug a laptop in to the data link port for tuning....
i have look through a lot of chats and can not seam to find it
does any one know what i am talking about or was i just dreaming
thanks
Supreme Member
iTrader: (3)
Joined: Nov 2001
Posts: 2,428
Likes: 2
From: Fairview Heights Illinois
Car: 1986 Irocz
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.25:1
Re: tuning
You need to go to the DIY PROM section and read the stickies, then look into some sites like this:
http://www.moates.net/index2.html
http://www.moates.net/index2.html
Thread
Thread Starter
Forum
Replies
Last Post