hey, i have an 87 iroc that came 350 tpi 700r4, and that motor was pulled and i put in the stock 700 with a 305 h.o. from an 87 monte carlo. rebuilt it, and have had a very hard time getting the wring going. everything was disconnected and not marked. its a mess. i might not have all the sensors and stuff, but ill need to get what i dont have. im not sure what those are yet. i am not running an air system or an egr valve and no 9th injector. i blocked off where the egr goes, and put on headers with no air pump. i have a v belt alt, ps pump and water pump. theres a lot of custom things goin on here, but i just need to know what to do with all the extra wires. and maybe how some of the harness run and what things go to what harness? im really lost in wires tangled in wires and need some help. also i have an a/c delete. also im needing some kind of vaccuum diagram. im using a comp cams canistar for the brakes and need to know how to hook that up too, it has 2 hoses coming off it. i can post any pix you guys want, but its a mess.

also will anyone want to trade your 5 prong working MAF Sensor for my 3 prong working MAF Sensor? Ill cover any shipping costs.

and i have a mallory promaster coil part number: 29440 and a mallory hyfire box that i have no idea how to hook up onto my 87 iroc. part number is faded on box. the coil has 2 terminals and the dist cap wire terminal and the box itself has 4 terminals= [trigger] [ground] [coil (+)(-)] .

im so lost in this project and wiring is really hard. i have schematics but i dont know what harness really goes where.

thanks for your help in advanced
keith.