HEY EVERYONE!
HEY EVERYONE!
I wanted to say hello and tell you a little bit about our company. I am the owner of Injectors Plus. I have been a member here for a bit, did a lot of trolling, and decided this was a forum I wanted to be involved in, so I purchased a sponsorship.
We provide complete fuel systems from fuel cell to intake manifold. We own our own cars and enjoy wrenching on them as much as we can, as time dictates.
If you're doing an LSX swap, we are expert in LSX motors. We have been working on TPI and TBI motors for a long time. Our shop is in northern NJ but we sell nationally and internationally.
We bring to the table service, knowledge, and experience I would say almost unmatched in the fuel delivery industry. I have on speed dial the CEOs for major corporations and world famous engine builders in the performance space, and they know who I am. If you need help with heads, cams, or something we don't carry, we'd be glad to work through the business to help you out.
Now, I will stipulate that we will not be the CHEAPEST place in the market, however, we offer top notch support. We have in depth knowledge, experience, and insight. We hope that our future contributions here will help earn your respect and hope we are worth a few extra bucks. We won't just show up and say "buy our junk"....we will be active and involved.
Our rebuilt injectors carry a LIFETIME warrantee. We hand pick only the best cores to build on, and you won't see anything come out of our shop that looks like garbage. We stand behind everything we do.
Our past has been in the drag racing environment where many of our customers are running 2000-3000 HP cars. The products we carry are respected, top of the line such as Areomotive, Marcella, Fast, XRP. We can help you spec a fuel system from end to end and provide the parts and knowledge to get it done.
One of our key niche's is developing CUSTOM fuel injectors. We do custom sets for the LS1. We have taken a Polaris Razor from 55HP to 240 HP. I do work for a well known race team in the PWC space. They OEM our products. And finally we do a lot of forced air work for a well known Harley shop in the mid west that builds 200-400HP bikes. So customization and off the wall applications are our strong suit. If it doesn't exist, we can make it.
For the TBI guys, I'm doing a skunk works project now....
If it works, we'll have a one of a kind product in that niche.
We have developed a great reputation on a number of forums. Our endorsements from customers are neither bought, shills, or relatives. You can trust what people say about us.
I look forward to working with everyone here, and if there is ANYTHING I can do, even if I can't sell you something, you let me know.
Regards,
John
We provide complete fuel systems from fuel cell to intake manifold. We own our own cars and enjoy wrenching on them as much as we can, as time dictates.
If you're doing an LSX swap, we are expert in LSX motors. We have been working on TPI and TBI motors for a long time. Our shop is in northern NJ but we sell nationally and internationally.
We bring to the table service, knowledge, and experience I would say almost unmatched in the fuel delivery industry. I have on speed dial the CEOs for major corporations and world famous engine builders in the performance space, and they know who I am. If you need help with heads, cams, or something we don't carry, we'd be glad to work through the business to help you out.
Now, I will stipulate that we will not be the CHEAPEST place in the market, however, we offer top notch support. We have in depth knowledge, experience, and insight. We hope that our future contributions here will help earn your respect and hope we are worth a few extra bucks. We won't just show up and say "buy our junk"....we will be active and involved.
Our rebuilt injectors carry a LIFETIME warrantee. We hand pick only the best cores to build on, and you won't see anything come out of our shop that looks like garbage. We stand behind everything we do.
Our past has been in the drag racing environment where many of our customers are running 2000-3000 HP cars. The products we carry are respected, top of the line such as Areomotive, Marcella, Fast, XRP. We can help you spec a fuel system from end to end and provide the parts and knowledge to get it done.
One of our key niche's is developing CUSTOM fuel injectors. We do custom sets for the LS1. We have taken a Polaris Razor from 55HP to 240 HP. I do work for a well known race team in the PWC space. They OEM our products. And finally we do a lot of forced air work for a well known Harley shop in the mid west that builds 200-400HP bikes. So customization and off the wall applications are our strong suit. If it doesn't exist, we can make it.
For the TBI guys, I'm doing a skunk works project now....
If it works, we'll have a one of a kind product in that niche.We have developed a great reputation on a number of forums. Our endorsements from customers are neither bought, shills, or relatives. You can trust what people say about us.
I look forward to working with everyone here, and if there is ANYTHING I can do, even if I can't sell you something, you let me know.
Regards,
John
Last edited by InjectorsPlus; Sep 15, 2010 at 06:40 PM.
Senior Member
Joined: Mar 2008
Posts: 428
Likes: 0
From: nj
Car: 89 iroc
Engine: l98
Transmission: tremec
Re: HEY EVERYONE!
I wanted to say hello and tell you a little bit about our company. I am the owner of Injectors Plus. I have been a member here for a bit, did a lot of trolling, and decided this was a forum I wanted to be involved in, so I purchased a sponsorship.
We provide complete fuel systems from fuel cell to intake manifold. We own our own cars and enjoy wrenching on them as much as we can, as time dictates.
If you're doing an LSX swap, we are expert in LSX motors. We have been working on TPI and TBI motors for a long time. Our shop is in northern NJ but we sell nationally and internationally.
We bring to the table service, knowledge, and experience I would say almost unmatched in the fuel delivery industry. I have on speed dial the CEOs for major corporations and world famous engine builders in the performance space, and they know who I am. If you need help with heads, cams, or something we don't carry, we'd be glad to work through the business to help you out.
Now, I will stipulate that we will not be the CHEAPEST place in the market, however, we offer top notch support. We have in depth knowledge, experience, and insight. We hope that our future contributions here will help earn your respect and hope we are worth a few extra bucks. We won't just show up and say "buy our junk"....we will be active and involved.
Our rebuilt injectors carry a LIFETIME warrantee. We hand pick only the best cores to build on, and you won't see anything come out of our shop that looks like garbage. We stand behind everything we do.
Our past has been in the drag racing environment where many of our customers are running 2000-3000 HP cars. The products we carry are respected, top of the line such as Areomotive, Marcella, Fast, XRP. We can help you spec a fuel system from end to end and provide the parts and knowledge to get it done.
One of our key niche's is developing CUSTOM fuel injectors. We do custom sets for the LS1. We have taken a Polaris Razor from 55HP to 240 HP. I do work for a well known race team in the PWC space. They OEM our products. And finally we do a lot of forced air work for a well known Harley shop in the mid west that builds 200-400HP bikes. So customization and off the wall applications are our strong suit. If it doesn't exist, we can make it.
For the TBI guys, I'm doing a skunk works project now.... If it works, we'll have a one of a kind product in that niche.
We have developed a great reputation on a number of forums. Our endorsements from customers are neither bought, shills, or relatives. You can trust what people say about us.
I look forward to working with everyone here, and if there is ANYTHING I can do, even if I can't sell you something, you let me know.
Regards,
John
We provide complete fuel systems from fuel cell to intake manifold. We own our own cars and enjoy wrenching on them as much as we can, as time dictates.
If you're doing an LSX swap, we are expert in LSX motors. We have been working on TPI and TBI motors for a long time. Our shop is in northern NJ but we sell nationally and internationally.
We bring to the table service, knowledge, and experience I would say almost unmatched in the fuel delivery industry. I have on speed dial the CEOs for major corporations and world famous engine builders in the performance space, and they know who I am. If you need help with heads, cams, or something we don't carry, we'd be glad to work through the business to help you out.
Now, I will stipulate that we will not be the CHEAPEST place in the market, however, we offer top notch support. We have in depth knowledge, experience, and insight. We hope that our future contributions here will help earn your respect and hope we are worth a few extra bucks. We won't just show up and say "buy our junk"....we will be active and involved.
Our rebuilt injectors carry a LIFETIME warrantee. We hand pick only the best cores to build on, and you won't see anything come out of our shop that looks like garbage. We stand behind everything we do.
Our past has been in the drag racing environment where many of our customers are running 2000-3000 HP cars. The products we carry are respected, top of the line such as Areomotive, Marcella, Fast, XRP. We can help you spec a fuel system from end to end and provide the parts and knowledge to get it done.
One of our key niche's is developing CUSTOM fuel injectors. We do custom sets for the LS1. We have taken a Polaris Razor from 55HP to 240 HP. I do work for a well known race team in the PWC space. They OEM our products. And finally we do a lot of forced air work for a well known Harley shop in the mid west that builds 200-400HP bikes. So customization and off the wall applications are our strong suit. If it doesn't exist, we can make it.
For the TBI guys, I'm doing a skunk works project now....
If it works, we'll have a one of a kind product in that niche.We have developed a great reputation on a number of forums. Our endorsements from customers are neither bought, shills, or relatives. You can trust what people say about us.
I look forward to working with everyone here, and if there is ANYTHING I can do, even if I can't sell you something, you let me know.
Regards,
John
Thread
Thread Starter
Forum
Replies
Last Post