I currently have the 350 pulled out of my gta. I have a stealthram with 24# injectors, trickflow super 23 195 with the .600 lift springs, comp cams xfi 268 and a 2400-2800 stall. The bottom end is going to be rebuilt and freshened with the stock components as long as they are in good shape. My question is is there anything I am overlooking or forgetting? Will ordering a chip from pcmforless make this driveable? Car already has hooker shortys and full exhaust.

 

Check everything. Plug wires, wires, connectors, plugs, freeze plugs. If the engine is out, make sure that if there are spliced wires, solder them and put heat shrink tubing.