Ok im lookin for good after market set ups i have a lb9 right now but hopeing to get a l98 block to build out to a 355 or 383 and wanna know where i can get a nice runner/intake set up cuz i wanna keep the tpi set up

 

Best bet is to port the base, slp runners and port the intake plenum

There are a few people on here that can do the porting if you aren't comfortable enough to do it yourself...

 

Ok sounds good and where can i fine the slp runners

 

http://www.ebay.com/itm/SLP-Performance-High-Flow-TPI-Intake-Runner-20002-/330943819027?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d0dc9ed13&vxp=mtr


Or look here in the parts for sale section

 

Ok ty for the help ice alwas loved these cars and the tpi set up idk why lol

 

You are aware a TPI based intake will restrict power on a big cube engine ?
( without $$$ mods , see https://www.thirdgen.org/forums/tpi/...owing-tpi.html)

For less than the cost of the aftermarket TPI base and big tube runners
http://www.summitracing.com/parts/edl-3860
http://www.summitracing.com/parts/sle-20002
or http://www.summitracing.com/parts/edl-3865

you can get a HSR intake
https://www.thirdgen.org/forums/alte...gal-whats.html

that has the potential to blow any TPI to the weeds
http://www.summitracing.com/parts/wnd-7540
http://www.summitracing.com/parts/HLY-534-186/

https://www.thirdgen.org/forums/post...683-post8.html

 

Vetteoz Ty for the tips i do love the stealth ram look and i dont get alot of time to look this up im working right. Now ty for the work