so I bought an 87 trans am yesterday with no engine or transmission,. but the car is a 5.0 TPI car. the car is missing the engine harness, I have the dual fans but I don't think I have the radiator mount. I also have an 87 trans am that was originally a lg4 carbed car and now has a 92 chevy tbi 350 that was converted back to carb. Its a 727 block with 193 heads. What needs done to get this 350 turned over to TPI and in the car. I am getting ready to purchase a tpi setup that includes all sensors, fuel rails, runners, intake and plenium. Do I have to order a tpi specific harness and computer. The engine has the truck tbi serp system on it, however I have the mounts and everything for a tpi car minus the bolts to mount it, where would be a good place to find them. Last question I pulled that radiator and condenser out of the carbed car, however the condenser seems to be smaller than what the one in the tpi car should be, were they different sizes.