I'm looking for some help. I have a 383 TPI which I built in 1991 but don't remember the cam specs. I think that they offered 2 or 3 back then any information would be greatly appreciated. Thanks John

 

Lpe had a few grinds. Two of the more popular were a 211/219 or might have been 213/219 duration cam that was used in some tpi based builds. The superram cam that was popular was a 219/219 .560" lift cam. It made alot of power for the advertised numbers

 

Edit

http://www.lingenfelter.com/category...alvetrain.html

They are still available. 211/219 .530/.560 112 and the 219/219 .560" 112 were the most popular rollers. But they have listed a few different grinds

 

Thank you for your help