TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Fuel and Static

Thread Tools
 
Search this Thread
 
Old Jan 3, 2002 | 10:26 PM
  #1  
Viking's Avatar
Thread Starter
Member
 
Joined: May 2000
Posts: 206
Likes: 14
From: Budd Lake NJ, USA
Car: / 89 IROC /
Engine: 305 TPI
Transmission: 700R4
Fuel and Static

There seemed no obvious catagory to post this tidbit on, so I chose TPI since it has to do with the fuel system.
My car nearly burst into flames yesterday at the gas station. A few times a year I add some STP Fuel Injector cleaner to a full tank. I got out at the gas station and "Mohammed" opened the gas door and took off the cap. I uncorked the STP and the instant it touched the filler neck, *crack* went a spark and the small amount of STP in the filler neck was actually on fire! I think I stood there for a second not beleiving what I was seeing, then I took a deep breath and blew it out. Mohammed was none the wiser but I bet he was wondering why I was a few shades paler when he came back to my side of the pump.
Moral of the story, watch the static electricity this time of year, ground yourself before touching that filler neck with anything out of the usual, it could save you car!
Reply
Old Jan 4, 2002 | 12:08 AM
  #2  
long&low's Avatar
Member
 
Joined: Apr 2001
Posts: 111
Likes: 0
From: Wichita, Kansas
Car: 88 ext.longbed 1/2 ton
Engine: TPI 350
Transmission: Slushbox 400
I think I would check to make sure you have the ground wire connected to the filler and at the tank(or at the body I can't remember where) and that it ain't cut some place.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Glowsock
Tech / General Engine
13
Jul 24, 2025 03:15 PM
92camaroJoe
TBI
32
Jul 29, 2023 07:57 PM
Andrew6.688
TPI
10
Dec 13, 2015 10:59 AM
92camaroJoe
Tech / General Engine
6
Aug 13, 2015 06:07 AM




All times are GMT -5. The time now is 11:17 PM.