est to hei swap
#1
est to hei swap
1993 chevy suburban with est dist. can i rewire the four pin connector that sends signal to tbi injectors as it sits ,no pulse please help.trying to make change do to lack of funds and already have hei laying around..
#4
Re: est to hei swap
oh i see its the smaller one and the hei is in and i pour gas into tbi and it will idle for a min but die ,obviously cause no pulse lol round and round we go lol
#5
Sponsor
iTrader: (92)
Re: est to hei swap
I have no idea what your factory wire colors are . But here is a schematic showing the large coil in cap distributor.
Here is a testing procedure for the pu coil. If the coil is ok the icm can be found on eBay for cheap to get you by until you get a better quality ac delco or Borg Warner ect..
https://easyautodiagnostics.com/gm/4...ed-icm-tests-1
#7
Re: est to hei swap
i see ,thanx for info so i take it hei is out of question do to not having some kind of interrupt circuit ,if thats what there called like abs or crank sensor with an exciter wheel type of thing ?...my old dist was plumb wore out ,original to truck
Thread
Thread Starter
Forum
Replies
Last Post
RSpeed
Tech / General Engine
5
08-27-2001 01:11 AM