TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Help with code 55

Thread Tools
 
Search this Thread
 
Old Feb 27, 2002 | 08:45 PM
  #1  
missythehood's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2001
Posts: 29
Likes: 0
From: pompano fl
Help with code 55

I have an 1986 chevy camaro iroc-z tpi 305
I am getting hesitation and staling at low rpm
and wot and i am getting a intermiting code 55
can some one please give me some kind of clue whats wrong
Thanks
Reply
Old Feb 28, 2002 | 02:05 PM
  #2  
phoenix350's Avatar
Member
 
Joined: Feb 2002
Posts: 159
Likes: 0
From: Illinois
according to the book

Well, i just looked the code up, and it said one of three things might be wrong, Poor eletrical connection, a short, or a defective ECM. i would say to look for shorts, and the poor electrical connection, and it would appear that the short is more likely. just kinda check your connections to ur ecm and other major functions. when i had a problem similar to this, at wot, then it was my coil, it was like arcing to my intake and was shorting everything out, and causeing my car to stall, BUT i never got a code for it. Thats about all i can give u for that, and an easy way to see if there r shortsin the engine bay is to look at night, with no lights on, u should be able to see the arc, but just because you don't doesn't mean there is no short, it could be hidden yet.

that's about all the advice i can give, take it for what its worth, not like its ***.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
89-IROCZ-5.0TPI
TPI
10
Feb 22, 2022 09:26 PM
Falcon50
DFI and ECM
81
Aug 22, 2020 03:26 PM
racereese
Tech / General Engine
14
Oct 3, 2015 03:46 PM
Luigytico09
TPI
0
Oct 1, 2015 08:46 AM
dusterbd
TPI
0
Sep 29, 2015 08:40 AM




All times are GMT -5. The time now is 01:19 PM.