What's that hole ???????
Thread Starter
Senior Member
iTrader: (1)
Joined: Sep 2001
Posts: 643
Likes: 0
From: Mechanicsburg,Pa usa
Car: 92'Camaro RS
Engine: a loud one
Transmission: bolted to the engine
What's that hole ???????
I got a TPI set up off of an 89' IROC. And i think i am missing something. There is a threaded hole on the pleneum on the drivers side in between the back two runners. At first i thought this might be the cold start injector but found nothing on the fuel rail to back this up. Then i read in 89' they eliminated the cold start injector. I am guessing there is a tube missing that goes from that hole to maybe the exhaust manifold to measure exhaust tempiture ????? I have no way of knowing since i have nothing to look off of. Does this sound correct or am i going way off on a limb here??????
Last edited by david roush; Apr 7, 2002 at 08:31 PM.
Supreme Member
iTrader: (2)
Joined: Jul 2001
Posts: 1,823
Likes: 1
From: San Antonio, TX
Car: 1988 IROC-Z
Engine: L98 (350 TPI)
Transmission: MD8 (700 R4) + 3.42 LS1 Rear
i believe that your are correct in assuming the CST. it's just an 88' and prior drivers side runner.
Last edited by mystikkal_69; Apr 7, 2002 at 09:41 PM.
Member
Joined: Apr 2001
Posts: 427
Likes: 1
From: Edmond, OK, USA
Car: 87 IROC
Engine: 305 TPI going to LT1
Transmission: 5spd
it sounds like the pcv vaccume hose. there should be a deally screwed in that has like a vaccume nipple type deal to put the vaccume hose on. thats all i can think of
Andrew
Andrew
Member
Joined: Mar 2001
Posts: 323
Likes: 1
From: CLIMAX, GA. USA
Car: 1972 LT1 Corvette
Engine: 350 HO
Transmission: M22 Heavy Duty 4 Spd
Axle/Gears: 336
The hole in the side of plenum goes to brake booster. Hole underneath is for MAT.
Last edited by 72LT1VETTE; Apr 7, 2002 at 11:39 PM.
Member
Joined: Apr 2001
Posts: 427
Likes: 1
From: Edmond, OK, USA
Car: 87 IROC
Engine: 305 TPI going to LT1
Transmission: 5spd
maybe if i woulda read better. PLENUM!! if its on the side its the brake booster but if its underneath then it could be the air temperature sensor.
Andrew
Andrew
Trending Topics
Thread Starter
Senior Member
iTrader: (1)
Joined: Sep 2001
Posts: 643
Likes: 0
From: Mechanicsburg,Pa usa
Car: 92'Camaro RS
Engine: a loud one
Transmission: bolted to the engine
okay got it now......MAT sensor.....Actually this board is the most useful thing around in my opinion. Have had nothing but help when i've been on here...Thanks :hail:
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
Bohemian
Aftermarket Product Review
11
Nov 25, 2015 09:38 PM