How Do I Make My 700-R4 hold up to 400hp???
Thread Starter
Member
Joined: Dec 2001
Posts: 164
Likes: 0
From: fairmont WV USA
How Do I Make My 700-R4 hold up to 400hp???
how can i make my 700-R4 hold up to 400 hp?? i dont wanna spend 1000 dollars for a B&M tranny or a TCI tranny if i dont have too Thanks -Don
Member
Joined: Feb 2001
Posts: 406
Likes: 0
From: Newark,NJ The state where racing on I 78 rules.
Transfixleo,
Do U sell or can u give all the part # for a stout rebuild for a 700r4 trans? If u sell a kit I would probally purchase one from U if the price is right. I also need some of the specialized tools used such as the spring compressors ETC... thanx
njdaewoo
Do U sell or can u give all the part # for a stout rebuild for a 700r4 trans? If u sell a kit I would probally purchase one from U if the price is right. I also need some of the specialized tools used such as the spring compressors ETC... thanx
njdaewoo
Supreme Member
Joined: Jul 1999
Posts: 3,479
Likes: 54
From: Calimesa, California, U.S.
I carry everything that is needed to do this right the first time. Take a look at my website www.pro-built.net Take a look at the rebuild kits, and let me know?
Junior Member
Joined: May 2002
Posts: 61
Likes: 0
From: Courtenay, B.C.
Car: 91 RS
Engine: 350 TBI
Transmission: 5 speed
Unless the tranny is already in bad shape, and needs a rebuild, I wouldn't rebuild it to put 400 ponies to it. But INSTALL A TRANNY COOLER! It will defineatly ease any stresses put on the tranny from those extra horses.
Thread
Thread Starter
Forum
Replies
Last Post
