braided tranny cooler lines
Thread Starter
Member
Joined: Feb 2001
Posts: 464
Likes: 0
From: Lenhartsville, PA
braided tranny cooler lines
Just wanted to let you guys know how I ran -6AN lines for my tranny cooler.
My friend Mark works at a welding place and they have brass -6AN fittings. he cut a male fitting in half and welded it to the fittings that go into the tranny. I ran two straight -6AN fittings off of those, ran the line, and used two 90's to connect to my B&M tranny cooler. Since the cooler has 1/2" NPT, I put two 1/2" to 3/8" bushings in and connected the 90's to that. Works great and looks sweet!!!
My friend Mark works at a welding place and they have brass -6AN fittings. he cut a male fitting in half and welded it to the fittings that go into the tranny. I ran two straight -6AN fittings off of those, ran the line, and used two 90's to connect to my B&M tranny cooler. Since the cooler has 1/2" NPT, I put two 1/2" to 3/8" bushings in and connected the 90's to that. Works great and looks sweet!!!
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
Hotrodboba400
Firebirds for Sale
0
Sep 2, 2015 07:28 PM
