B&M TransPak
Supreme Member
Joined: Apr 2001
Posts: 4,969
Likes: 0
From: USA
Car: yy wife, crazy.
Engine: 350, Vortecs, 650DP
Transmission: TH-350
Axle/Gears: 8.5", 3.42
Click here--->
Look for "B&M" and you'll get about 1000 biased opinions.
I have that same kit. I've had it over a year and about 20K miles and I haven't had ONE problem. It's a good kit...... but 99.9% of the "followers" on here will tell you otherwise.
AJ
Look for "B&M" and you'll get about 1000 biased opinions.
I have that same kit. I've had it over a year and about 20K miles and I haven't had ONE problem. It's a good kit...... but 99.9% of the "followers" on here will tell you otherwise.
AJ
Supreme Member
Joined: Nov 1999
Posts: 1,253
Likes: 1
From: Hawaii
Car: 1984 Chevy Camaro
Engine: Built L98
Transmission: T-56 6 speed
Everyone says the kit sucks. And I dont know if their right or not O_o I have the kit in my trans and its either
1) I pound my trans way to much (downshifting, upshifting, sudden rear tire lock ups, etc)
or
2) The B&M kit screwed up my trans O_o
Either way I had to rebuild my trans about once a year. I got tired of all that crap so I bought myself a T56.
1) I pound my trans way to much (downshifting, upshifting, sudden rear tire lock ups, etc)
or
2) The B&M kit screwed up my trans O_o
Either way I had to rebuild my trans about once a year. I got tired of all that crap so I bought myself a T56.
Thread
Thread Starter
Forum
Replies
Last Post
Josh 91RS
Transmissions and Drivetrain
21
Jan 11, 2001 08:04 PM
