converting auto to manual

Reply Subscribe

Thread Tools

Search this Thread

Feb 17, 2004 | 04:31 PM

crossfire462

Thread Starter

Junior Member

Joined: Feb 2004

Posts: 3

Likes: 0

Car: 88 iroc

Engine: tpi 305

Transmission: 700r4

converting auto to manual

I have an 88 iroc 305 TPI with a auto tranny. What would I have to do to convert the car to manual. what parts will I need and will It take alot of work. also has anyone done this yet? thanks

Feb 17, 2004 | 04:44 PM

91FireChicken

Member

Joined: Dec 2000

Posts: 180

Likes: 0

From: Raleigh, NC, USA

Car: 91 Firebird

Engine: L03

Transmission: A4

well, there are probably thousands of this exact thread on this board... in fact, I think there's a tech article on it...

check www.thirdgenresource.com for a tranny and swap kit with all the parts.. the tech article here on TGO has the parts list also, I believe.

Feb 17, 2004 | 04:55 PM

TKOPerformance

Supreme Member

Joined: Dec 2003

Posts: 2,391

Likes: 1

From: Newark, DE

Car: '86 Camaro, '02 WRX, '87 K5, '67

Engine: 350 TPI, 2.0turbo, 383 in the works, 289-4BBL, 232, A-head 4-cylinder

Transmission: T56, 5-speed, 700R4, C4, T176, semi-auto 2-speed

Axle/Gears: 3.73, 3.90, 4.88, 3.55, 3.54, 7.00

You need to ask specific questions in order to get responses. Other users tend not to reply to general questions like this because for one you can find almost all of the information you need by searchign the forum. Two, it would take a long time to type a response that is detailed enough to give you all the pertinent info. I'm not trying to be a jerk, but I see you're new, so I want you to get the most out of your TGO experience.