Need Rearend Help!!!
Thread Starter
Junior Member
Joined: Jan 2003
Posts: 5
Likes: 0
Need Rearend Help!!!
I bought the SS zexel-torsen differential from SLP and i'm putting it in a 3rd gen rearend, I can't figure out to attach the axles witht the C clips, If anyone has done this or has information on it PLEASE let me know, thanks
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
As far as I know, the Zexel doesn't use the C clips but rather the paddle as they call it, the block that fits in there somewhere.
Ed
Ed
Thread Starter
Junior Member
Joined: Jan 2003
Posts: 5
Likes: 0
i'm not quite sure I understand - if anyone can be more detailed I would appreciate it. Am I missing anything to put them in or ?
Its at the place where its getting put together and I need this info quick. Thanks
Its at the place where its getting put together and I need this info quick. Thanks
Senior Member
Joined: Aug 2002
Posts: 676
Likes: 0
From: Detroit, Michigan
Car: 04 Xtreme Blazer
Engine: 4.3L V6
Transmission: 4L60E
Originally posted by ebmiller88
As far as I know, the Zexel doesn't use the C clips but rather the paddle as they call it, the block that fits in there somewhere.
Ed
As far as I know, the Zexel doesn't use the C clips but rather the paddle as they call it, the block that fits in there somewhere.
Ed
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Thanks Dave, I sold my ZT before I had the chance to install it.
Ed
Ed
Thread
Thread Starter
Forum
Replies
Last Post
UltRoadWarrior9
Tech / General Engine
336
Apr 28, 2020 10:39 PM
