Transmissions and Drivetrain Need help with your trans? Problems with your axle?

Need Help please

Thread Tools
 
Search this Thread
 
Old Jun 10, 2004 | 08:46 PM
  #1  
Mot-Header's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2004
Posts: 13
Likes: 0
From: Northeast ohio
Car: 1985 Ponatic Firebird
Engine: 2.8 V6 But i have a 305 V8 to install
Transmission: 5 spd. Manual
Need Help please

have a 305 engine to install in my 85 firebird and i would like to know if i can still use my 5 speed manual transmission that is in the car now it has a 2.8 lier engine in it now. Also any help with a kit or place that that can help me find a bellhousing and clutch assy.
Reply
Old Jun 10, 2004 | 09:33 PM
  #2  
urbanhunter44's Avatar
Supreme Member
iTrader: (3)
 
Joined: May 2004
Posts: 4,345
Likes: 1
From: Brighton, CO
Car: '72 Chevy Nova
Engine: Solid roller 355
Transmission: TH350
Axle/Gears: 8.5" 10-bolt 3.73 Posi
I believe the gear ratios were really different between the 2.8 and the 5.0 for any year.

Check the bottom of the equations page on the home page of tgo for your transmission and the transmission from the car you got the engine from.
Reply
Old Jun 10, 2004 | 09:46 PM
  #3  
RB83L69's Avatar
Supreme Member
 
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
The bell housing will not bolt to a V8. So no, you'll have to find the V8 stuff, the 6-cyl stuff won't work.

This question gets asked every couple of days. It's one of th emost baic swap questions there is. If you just read through the posts, you'll find it over and over again. Do a search for more specific stuff, this subject has been covered in exhaustive detail, and you can probably find more out about it htan you even thought existed.

On this board, this button is your friend!!
Attached Images  
Reply




All times are GMT -5. The time now is 11:55 AM.