i have a 700r4 with a transgo shift kit setup for full manual shifting. everything was going fine for a while and then about a year ago i decided to pull the engine. after that the car sat for a good 6 months and now it will not shift into 3rd, however i can shift from 2nd to OD then pull it back to 3rd. i did swap over to a carb and got rid of my wiring harness. i cut the wires to the tcc lockup(dont know if this will effect it or not) im guessing something is clogged in my valve body. the shifter cable is in proper adjustment. does anyone have any suggestions? thanks for any info