4speed to T5 conversion
Thread Starter
Junior Member
Joined: May 2001
Posts: 9
Likes: 0
From: Edmonton, Alberta, Canada
Car: 1982 Z28
Engine: 305
Transmission: 4 Speed Manual
4speed to T5 conversion
I have a 92 camaro with a Saginaw 4 speed and I've blown the transmission.
If I wanted to go to a T5, what do I need to replace.
Do I need a new bell housing, clutch, etc.?
Do I need to convert to a hydraulic linkage?
Thanks,
Peter.
If I wanted to go to a T5, what do I need to replace.
Do I need a new bell housing, clutch, etc.?
Do I need to convert to a hydraulic linkage?
Thanks,
Peter.
Joined: Jul 2000
Posts: 6,518
Likes: 91
From: Aridzona
Car: `86 SS / `87 SS
Engine: L69 w/ TPI on top / 305 4bbl
Transmission: `95 T56 \ `88 200-4R
If it's an 82 (sometimes typos are annoying,) then you can just get an 83 bellhousing (or the Lakewood one for mechanical in 82-83 F; the 15000 wont' work.) Then get the shorter tq. arm and driveshaft from an 83-92 and crossmember.
Not much more to it.
Not much more to it.
Thread
Thread Starter
Forum
Replies
Last Post
vortech305
Tech / General Engine
2
Jun 3, 2001 11:24 AM
vortech305
Aftermarket Product Review
2
Mar 28, 2001 02:19 PM
